Suche

nuestra búsqueda por "new" devuelve 33 resultados.

  1. Jowatherm-Reaktant® 604.35

    detection of the adhesive in quality inspections on the production line. The new adhesive provides maximum flexibility and process reliability for processors
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-pur-hotmelt/jowatherm-reaktantr-60435/

  2. Jowat-Toptherm® 237.50

    adhesion and a “zero bondline” are required. In many cases, investments into new machinery are not necessary. In addition, Jowat-Toptherm ® 237.50 is in conformity [...] manufacture, the equipment, adhesives and processors are permanently faced with new challenges. To meet the changing requirements in the market, existing systems
    /es-US/adhesives/hot-melt-adhesives/jowat-toptherm-po-hot-melt-adhesive/jowat-topthermr-23750/

  3. Jowacoll® Dispersions for Flat Lamination

    modern health and environmental concerns and are unsuitable for many of the new materials. The dispersion adhesives of the Jowacoll ® series are among the efficient
    /es-US/adhesives/dispersion-adhesives/jowacoll-dispersions-for-flat-lamination/

  4. Jowacoll® 764.xx Film Laminating Adhesives

    764.xx, so that it can be used up fast. Leftover amounts can be remixed with new batches, but should be reserved for operations which do not demand such high-quality
    /es-US/adhesives/dispersion-adhesives/film-laminating-adhesives/

  5. Hygiene Guidelines Dispersions

    limited amount of preservatives added to dispersion is further restricted by new legal requirements. This is inevitable and cannot be avoided by e.g. using [...] inhibits the growth of microorganisms in possibly contaminated containers. When new production lines are planned, it should also be made sure that they are easy
    /es-US/adhesives/dispersion-adhesives/hygiene-guidelines-dispersions/

  6. Cleaning and Adhesive Change of Wrapping Units

    and unit, and depends largely on the type of adhesive used. If the old and the new hot melt adhesive are based on different chemicals, it is necessary to clean [...] hoses, etc.) should be flushed at low temperature and pressure with either the new adhesive itself or with Jowat ® flushing agent 931.00 or 931.10 depending on
    /es-US/adhesives/cleaning-and-flushing-agents/cleaning-of-wrapping-units/

  7. Cleaning of Slot Nozzles and Applicator Heads

    hoses, etc.) should be flushed at low temperature and pressure with either the new adhesive itself or with Jowat ® flushing agent 931.00 or 931.10 depending on
    /es-US/adhesives/cleaning-and-flushing-agents/cleaning-of-slot-nozzles/

  8. Cleaning of PUR Edgebanders

    and unit, and depends largely on the type of adhesive used. If the old and the new hot melt adhesive have different chemical bases, it is necessary to clean the
    /es-US/adhesives/cleaning-and-flushing-agents/cleaning-of-edgebanders/

  9. Jowat-Toptherm® 238.20

    diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension. The new thermoplastic
    /es-US/adhesives/hot-melt-adhesives/jowat-toptherm-po-hot-melt-adhesive/jowat-toptherm-23820/

  10. Jowapur® 681.10 - 681.60

    between assembly times and pressing times, Jowapur ® 681.xx opens up completely new possibilities and facilitates a capacity increase as well as higher process [...] therefore lower the costs of the existing manufacturing processes. Planers of new systems can design procedures with more flexibility and optimise the capital
    /es-US/adhesives/reactive-systems/jowapur-681xx/

Ordenar por

Remove all filters