Suche

manufacturers pleat the filter media and stabilize it using a hot melt adhesive.” Adhesives like Jowatherm 262.25 based on ethylene-vinyl acetate (EVA) are optimally [...] filters is due to the adhesive used in the manufacturing process of HEPA filters. “Big filter elements contain up to six kilograms of adhesive,” says Dressler. It [...] filter manufacturing process is delicate and, in addition to bonding, the adhesive used has to fulfill a wide range of functions. Building filters for air p

Green Adhesives Jowat supplies a comprehensive portfolio of green adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer [...] ” The adhesive manufacturer Jowat draws on extensive expertise in the manufacture of building elements facilitated by many years of experience. Jowat bonding [...] are used in the formulation of the adhesive? What impact does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding

pour l'utilisation de colles modernes. Avec la gamme Green Adhesives, le fabricant de colles Jowat propose un ensemble de colles et de services tournés vers [...] jamais en concurrence avec la production agroalimentaire. Dans ces conditions, Jowat élargit constamment sa gamme avec des colles pratiques qui peuvent être utilisées

consumption of adhesive and downtimes. Minimizing the stringing is therefore a key objective for Jowat in the development of sustainable adhesives. The importance [...] apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling behind it a fine [...] wasting adhesive, this also increases the cleaning effort, leading to extended maintenance and production standstills. The success of PO hot melt adhesives has