Suche

“wood glues” – impress with a wide range of benefits. They are physiologically harmless, form a colourless bondline, and have a relatively low viscosity. In [...] and processing equipment and has played a major role in the wide use of this type of adhesives. PVAc glues are used in a broad spectrum of applications. From frame [...] veneering – PVAc glues provide a reliable bond on many different wood species and wood-based substrates. Jowacoll ® 104.20 is a general-purpose glue in the Jowat

foundation of a good night’s sleep and rest. Adhesives are a key component in a very wide range applications in the manufacture of all types of mattresses. [...] comfort and health, and therefore directly contributes to a good night’s sleep. Jowat-Toptherm ® 231.60 is a modern PO hot melt adhesive used in the assembly of pocket [...] adhesive impresses in this application with a log-term durability which has been verified many times in roller tests. Due to a careful selection of raw materials, the

requirements. The long open time of the adhesive allows a lot of flexibility in processing. Coupled with a high green strength, it facilitates the reliable bonding [...] of the most widely used adhesive application. Products have been laminated for a variety of reasons. While laminations largely fulfilled decorative requirements [...] For instance, surfaces and materials may be protected by laminating them with a high-resistance layer (e.g. kitchen worktops laminated with pressure laminates

are used to a steadily increasing degree in assembly bondings and flat lamination for car interiors. One reason for the growing demand for this type of adhesive [...] Jowat succeeded in developing a thermoplastic PO hot melt adhesive that is characterised by an extremely high heat resistance and a very wide range of adhesion [...] adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance values that are by approx. 20 – 30 °C higher than those

series are characterized by a high composite adhesion also with demanding further processing and can be processed on standard machine types with significantly improved [...] food contact is no longer necessary. The minimised cleaning efforts can lead to a considerable time and consequently cost advantage. In case you should change [...] regard to food contact. In combination with the quality level this represents a unique position in the market.

roof. With a span of 15 metres, the wood-concrete-composite ceiling is so far the biggest of its type in Germany. This year’s symposium ended with a ceremony [...] customers” concept, provided a more than worthy framework for this year’s symposium. The lectures session was started by “lignotrend”, a manufacturer of cross-laminated [...] offers workplaces for 45 Jowat employees. Based on a glued laminated timber frame, the building also has a unique design: Outside, on the surrounding walkway

excellent results in roll tests with up to 45,000 cycles. A relatively low viscosity facilitates a good Penetration into the PP nonwoven. In spite of the low [...] adhesive can be processed on all standard unit types and applied vertically as well as horizontally, providing a stable adhesive bead which does not move during [...] excellent performance in fast assembly processes, bridging the tensions and ensuring a permanent bonding of the rows of pocket innerspring. Jowatherm ® 261.65 has been

provide a high value contribution. Pleating and frame bonding Jowatherm ® and Jowat-Highterm ® adhesives for pleating and frame assembly provide a high initial [...] impress through superior adhesion to different types of filter materials, like papers and non-wovens, and a high heat resistance which is necessary for downline [...] requirements with regard to air filtration in vehicles and buildings, as well as a wide range of filter materials and manufacturing methods. And the demands are

liées. Mais est-ce toujours le cas? Un nouveau développement du marché donne un type de reliure totalement nouveau qui devient de plus en plus attrayant: la méthode [...] une bonne performance d'ouverture à plat sont les plus valorisées. L’expérience a clairement montrée que le client final accepte le coût de production sans se

concerne leurs propriétés de résistance au feu. Informations sur le produit ☟ Choose a product group 1-component 2-component hot melt adhesive 1-component Base Viscosity [...] wood species, for polystyrene foam, PUR foams, metals and many other substrates. A.1/3.18 e de en fr Jowapur ® 685.12 1-Component PUR Prepolymer 6000 / 20 > 10 [...] species, for PUR foam materials and polystyrene foam, and many other substrates. A.1/3.18 e de en fr Jowapur ® 685.32 1-Component PUR Prepolymer pasty / 20 > 10