Suche

Manufacturing bonded load-bearing timber structures (Fingerjointing) Adhesive Type: EN 15425–I–70–FJ–0.1–w de en fr Jowapur ® 686.30 1-Component PUR Prepolymer [...] 10500 / 20 15 / 20 Manufacturing bonded load-bearing timber structures Adhesive Type: EN 15425–I–70–GP–0.3–w de en fr Jowapur ® 686.60 1-Component PUR Prepolymer [...] 10500 / 20 45 / 20 Manufacturing bonded load-bearing timber structures Adhesive Type: EN 15425–I–70–GP–0.3–w de en fr Jowapur ® 681.10 1-Component PUR Prepolymer

developing a technology that will sustainably replace the previous process. In addition to a new type of plastic base beam, the focus here is on a new adhesive [...] usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] e, it would be advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and

“wood glues” – impress with a wide range of benefits. They are physiologically harmless, form a colourless bondline, and have a relatively low viscosity. In [...] and processing equipment and has played a major role in the wide use of this type of adhesives. PVAc glues are used in a broad spectrum of applications. From frame [...] veneering – PVAc glues provide a reliable bond on many different wood species and wood-based substrates. Jowacoll ® 104.20 is a general-purpose glue in the Jowat

roof. With a span of 15 metres, the wood-concrete-composite ceiling is so far the biggest of its type in Germany. This year’s symposium ended with a ceremony [...] customers” concept, provided a more than worthy framework for this year’s symposium. The lectures session was started by “lignotrend”, a manufacturer of cross-laminated [...] offers workplaces for 45 Jowat employees. Based on a glued laminated timber frame, the building also has a unique design: Outside, on the surrounding walkway

excellent results in roll tests with up to 45,000 cycles. A relatively low viscosity facilitates a good Penetration into the PP nonwoven. In spite of the low [...] adhesive can be processed on all standard unit types and applied vertically as well as horizontally, providing a stable adhesive bead which does not move during [...] excellent performance in fast assembly processes, bridging the tensions and ensuring a permanent bonding of the rows of pocket innerspring. Jowatherm ® 261.65 has been

requirements. The long open time of the adhesive allows a lot of flexibility in processing. Coupled with a high green strength, it facilitates the reliable bonding [...] of the most widely used adhesive application. Products have been laminated for a variety of reasons. While laminations largely fulfilled decorative requirements [...] For instance, surfaces and materials may be protected by laminating them with a high-resistance layer (e.g. kitchen worktops laminated with pressure laminates

depending on the local need. This facilitates a safe transport and storing of the adhesive. Versatility. For a more elastic glue line with improved adhesion [...] Wood-based material lamination is one of the most important applications for all types of adhesives in the standard production of furniture. The range of bonding [...] short setting times (hardening), and high bond strengths. Jowat ® 950.50 is a UF resin for hot and cold curing, especially for classic veneering and for flat

are used to a steadily increasing degree in assembly bondings and flat lamination for car interiors. One reason for the growing demand for this type of adhesive [...] Jowat succeeded in developing a thermoplastic PO hot melt adhesive that is characterised by an extremely high heat resistance and a very wide range of adhesion [...] adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance values that are by approx. 20 – 30 °C higher than those

shapes with a highly attractive design. Carrier bags can be manufactured at low costs with Jowat-Toptherm ® hot melt adhesives, which provide a reliable bond [...] materials such as polypropylene woven without a prior surface treatment. These hot melts are characterised by a good wetting property, strong adhesive force [...] the manufacture of packaging units that have to withstand heavy loads. This type of material is required for instance to produce sacks and bags for the packaging

provide a high value contribution. Pleating and frame bonding Jowatherm ® and Jowat-Highterm ® adhesives for pleating and frame assembly provide a high initial [...] impress through superior adhesion to different types of filter materials, like papers and non-wovens, and a high heat resistance which is necessary for downline [...] requirements with regard to air filtration in vehicles and buildings, as well as a wide range of filter materials and manufacturing methods. And the demands are