Suche

fire aspects. In addition to mineral and synthetic materials, the use of plant-based substances is also growing. Technical properties such as thermal conductivity [...] the optimization of the energy efficiency of buildings. Product Information Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range [...] adhesive for your particular application. Note: The information on this page is based on test results from our laboratories as well as on experience gained in the

these aiming at products with lower weight in comparison to conventional wood-based substrates used in the manufacture of furniture ( linke for instance solid [...] hydrophobic treatment of the substrate which reinforces the surface of the wood-based carrier substrate increasing its hardness and reduces the release of VOC by [...] ☟ Choose a product group dispersion hot melt adhesive prepolymer dispersion Base Viscosity [mPas] / Temperature [°C] Open Time [min] / Temperature [°C] pH Value

materials underneath them. Adhesives used for this application so far have been based on polyamide. However, they only have low resistance to thermal oxidation. [...] high susceptibility to disruptions in the process. Jowat-Toptherm ® 845.10 is based on innovative raw materials with superior resistance to oxidation. By using

filament to the underside and facilitate high pull strength. The polyolefin-based (PO) adhesives are applied by roller or by nozzle in a single operation on [...] textile floor has to be fully recyclable. PO hot melt adhesives from Jowat are based on the same chemical basis as the PE bottom layer and the PP filaments, and

Product Description For decades, bonding edgebands to wood-based boards has been an established practice in the manufacture of furniture. Progress in engineering [...] with perfect and almost invisible bondlines. The reactive hot melt adhesive based on polyurethane meets superior requirements regarding moisture and heat resistance

packaging processes. The truly pioneering product was the first hot melt adhesive based on metallocene catalysed polyolefin introduced by Jowat and has been tried [...] the bonding of the demanding surfaces increasingly used in innovative fibre-based packaging. This hot melt adhesive also demonstrates its qualities under deep-freeze

processing. Jowat ® 900.00 is used primarily as a release agent for adhesives based on PVAc dispersion, UF, MUF and PRF. In addition, the formulation contains [...] oil and grease. Product Features Jowat ® 900.00 Release agent for adhesives based on PVAc dispersion, UF, MUF and PRF. Application: For cold and hot pressing

dispersion postforming hot melt adhesive Worktop sealing postforming dispersion Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range [...] Glue 11000 / 20 15 1,07 ± 0,05 / 20 de en fr postforming hot melt adhesive Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range [...] 36300 ± 7800 / 200 190 - 210 145 ± 5 1,1 ± 0,03 / 20 de en fr Worktop sealing Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range

increasing. Jowat develops thermoplastic and reactive hot melts and solvent-based adhesives, tailored for each specific application and used successfully worldwide [...] assembly of spring mattresses pocket spring assembly assembly of spring mattresses Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range [...] 476.70/74 SBS 1.900 / 20 15 - 25 74 1 - 20 de en fr pocket spring assembly Base Viscosity [mPas] / Temperature [°C] Processing Temperature [°C] Softening Range

are the product of choice for dowel and tenon joints of solid wood and wood-based parts. These adhesives are characterised by optimum viscosity, excellent processing [...] strength, and ensure a high-quality and durable joint. Product Information - Base Viscosity [mPas] / Temperature [°C] Open Assembly Time [min] / Temperature [°C] [...] adhesive for your particular application. Note: The information on this page is based on test results from our laboratories as well as on experience gained in the