Suche

renewable raw materials remains transparent due to appropriate verification and certification systems such as ISCC PLUS, similar to the concept of green electricity [...] subject to hazard classification. Monomer-reduced PUR hot melt adhesives have a low content of monomeric diisocyanate (MDI) of less than 0.1 percent and are therefore

Datos técnicos ☟ Choose a product group Low Formaldehyde Dispersions Low VOC and FOG Adhesives MOSH/MOAH-free Low Formaldehyde Dispersions Base Application [...] processing characteristics, fast setting, good heat resistance 10000 / RT de en fr Low VOC and FOG Adhesives Base Application Characteristics Viscosity [mPas] / Temperature [...] strength coupled with outstanding resistance to heat and very good resistance to low temperatures. 23000 / 140 de en Jowatherm-Reaktant ® MR 642.90 Monomer-Reduced

materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion [...] materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion [...] materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion

activated charcoal are neutral in odour and provide low fogging and emission values. Bonds made with the low VOC adhesives - Jowat-Toptherm® and Jowatherm-Reaktant® [...] activated charcoal media and keep manufacturing processes efficient. Using lower amounts of adhesives improves the capacity of the filter media and reduces [...] filter components with activated charcoal, even when applying less adhesive. Lower grammages allow for a maximum of free active charcoal surface in the process

is to find a balance between good flowing properties at low temperatures (in general, this means a low viscosity) and very high initial strength immediately after [...] Organization) standards regarding flame spread resistance and have wheel mark certification for applications in shipbuilding interiors. Therefore, they are ideally [...] role in this process. If the pressure during joining of e.g. sanded HPL is too low, the surface of the substrate is not wetted completely and the adhesive will

® Crosslinking Agent 197.65. Additionally, this crosslinker is effective in lower concentrations. The bond strength necessary for transport is build up in a [...] the new dispersion and the new crosslinking agent also provide a reduction in VOC and fogging values.

development of green adhesives are aspects that could impact human health. Low-pollutant and low-emission bonding solutions benefit consumers in the long term due to [...] manufacture of air filters. The adhesives used all comply with the different certification or standard requirements applicable to the specific component—be it in [...] means that the work on site can be finished much quicker and at significantly lower costs compared to traditional renovation methods. Modern adhesives are an

formaldehyde emissions are 80 % lower than those of their predecessors. In the automotive industry, adhesives with reduced VOC and FOG levels, for example few [...] involves a high energy input. Low-temperature hot melt adhesives, on the other hand, can be melted and processed at significantly lower temperatures, in some cases [...] bonding process with lower risks of burns for processors. Another advantage of the temperature reduction during processing is the lower thermal load on the adhesives

reduction of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin [...] the required tack. These adhesive formulations with low resin amounts lead to a substantial reduction in VOC emissions. Another clear improvement of impact resistance [...] spectrum of this adhesive covers for example highest surface quality and lowest VOC emission. The high impact resistance (Shore hardness) of Jowat-Toptherm® 236

adhesives of the Jowacoll ® series are among the efficient alternatives due to lower VOC emissions and therefore a reduction of harmful ingredients. The portfolio [...] veneer require another adhesive compared to non-absorbent substrates with a low surface tension. An example for this are bonding operations involving materials [...] role. Also, one of the substrates needs to be absorbent. High temperatures and low humidity reduce the assembly and Pressing times. The minimum film-forming t