Suche

nuestra búsqueda por "2,2.6" devuelve 61 resultados.

  1. Jowatherm-Reaktant® MR 642.90

    Isocyanate (usually 4-4’- Methylene diphenyl diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with an MDI (CAS No. 101-68-8)
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-64290/

  2. Jowatherm-Reaktant® MR 607.90

    (usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-60790/

  3. Jowatherm-Reaktant® MR 630.99

    isocyanate (usually 4-4’- Methylene diphenyl diisocyanate – in short MDI) of approx. 2 %. Since 2002, products containing isocyanate with an MDI (CAS No. 101-68-8)
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-pur-hotmelt/jowatherm-reaktantr-mr-63099/

  4. Jowatherm-Reaktant® MR 609.93

    (usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-60993/

  5. Jowatherm-Reaktant® MR 608.90

    (usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate
    /es-US/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-60890/

  6. LayFlat

    Download technical data sheet (PDF) Jowacoll ® 765.25 Copolymer Dispersion | 2-Component SF System (solvent-free) colourless translucent Photo album / book
    /es-US/aplicaciones/industria-grafica/encuadernacion/layflat/

  7. Madera laminada

    abierto largo, por lo que facilitan la fabricación de piezas y lotes grandes. © CA2M Shigeru Ban Architects Europe & Jean de Gastines Artefactory Los adhesivos de
    /es-US/aplicaciones/industria-maderera/materiales-con-base-de-madera/laminada/

  8. Madera duradera

    el tiempo de prensado sea mucho más largo. 1. Specimen: Accoya ® scantling... 2. ...in the splitting process... 3. ...after Splitting: 100 % wood failure. I
    /es-US/aplicaciones/industria-maderera/materiales-con-base-de-madera/madera-duradera/

  9. Cleaning and Adhesive Change of PUR Laminators

    adhesive remnants should be collected in a coated drip pan or a similar container. 2. In addition, hot melt adhesive may be cleaned off the application roller using [...] approx. 10 minutes while the rollers are rotating (standard operation mode). 6. Run the rollers in reverse (cleaning mode) to drain the liquid cleaner into
    /es-US/adhesives/cleaning-and-flushing-agents/cleaning-and-adhesive-change-of-pur-laminators/

  10. Cleaning of PUR Edgebanders

    Carefully remove as much as possible of the PUR hot melt remnants from the walls. 2. Fill the suitable Jowat ® flushing agent (depending on the adhesive type) into [...] damaged. Please also observe all recommendations of the equipment manufacturer. 6. Flush the tank at processing temperature with a small amount of the adhesive
    /es-US/adhesives/cleaning-and-flushing-agents/cleaning-of-edgebanders/

Ordenar por

Remove all filters