Suche

melt units of the latest generation with automatic filling systems and reduced tank volumes.

dispense and melt according to your needs, for example in an extruder or a melting tank, and can then be applied directly via roller or slot nozzle. Application Description

are either filled with a cartridge or supplied with adhesive from a melting tank – filled with granulate or adhesives in pillows – through a heatable hose.

status of the product is available upon request. For processing with classic tank applicators or tankless melters. de en fr Jowat-Toptherm ® 852.00 900 ± 300

things must be considered to ensure a successful bonding result. Is the adhesive tank open? How high is the temperature? For how long will the adhesive remain molten

effect. Melting Tank (Glue Pot) 1. At processing temperature, drain as much as possible of the PUR hot melt adhesive from the melting tank. Carefully remove [...] adhesive type) into the melting tank. To increase the cleaning effect, use a wooden/silicon spatula to spread the granulate in the hot tank before melting. Be careful [...] roller and on the melting tank will not be damaged. Please also observe all recommendations of the equipment manufacturer. 6. Flush the tank at processing temperature

in the worst case. To prevent this from happening, the application system (tank, nozzles, hoses, etc.) should be flushed at low temperature and pressure with

in the worst case. To prevent this from happening, the application system (tank, nozzles, hoses, etc.) should be flushed at low temperature and pressure with

or a loss in quality caused for instance by increased charring in the melter tank or hoses, soiled cutter blades, failing bondlines or untight filter bags. Moreover

diesen Spezialklebstoffen beliefert. Mit einer Kapazität von 30‘000 Litern pro Tank bieten die neuen Tanks nun genügend Volumen für die Lagerung, der in der Produktion