Описание приложения

Технические ткани применяются в различных отраслях промышленности. Например, при производстве наждачной бумаги велюр ламинируется с обратной стороной бумаги. Затем соединенные материалы прокатываются и выдерживаются в течение 24 часов, после чего разрезаются и упаковываются.
Для нанесения клея используются, как правило, щелевые наконечники-распылители или валики, а клеи способствуют оптимизации производственных процессов и улучшают свойства конечного продукта. Во время использования наждачная бумага подвергается сильному механическому и тепловому воздействию, поэтому клеевой состав должен обеспечивать высокую прочность соединения. Отдельные слои должны оставаться склеенными до полного износа абразивной поверхности. Поэтому полиуретановые клеи расплавы, которые характеризуются очень высокой первоначальной
прочностью и оптимальной адгезией к бумажным подложкам, 
 являются оптимальным выбором для ламинирования наждачной бумаги. Указанные свойства играют значительную роль непосредственно после ламинирования и обеспечивают оптимальную надежность соединения в ходе последующих процессов производства

Фильтрующие элементы также изготавливаются из ламинированных материалов и активированного угля, приклеенных к тканевой основе. Ламинированные слои должны обладать высокой поглощающей способностью и проницаемостью, что является главным требованием, предъявляемым к фильтрам. Термопластичные ПО и реактивные ПУР расплавы обеспечивают высокопрочные соединения при минимальном количестве нанесенного клеевого состава.
 

 

Информация о продукте

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Application UV Marker Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 630.80 PUR Hot Melt Adhesive 8000 / 140 110 - 140 interior car panelling for instance hat racks, roof liners, door panelling etc.; compound materials + de en fr
Jowatherm-Reaktant® GROW 631.20 Biobased Hot Melt Adhesive 6000 ± 2000 / 140 110 - 140 Laminating adhesive for manufacturing substrates for interior car trims, e.g. percel shelves, headliners, door trim, etc. Also for the assembly if composite materials in the textile industry. de en fr
Jowatherm-Reaktant® MR 630.99 Monomer-Reduced PUR Hot Melt Adhesive 9000 ± 3000 / 110 100 - 130 For the assembly of composite materials in the textile industry. de en fr
Jowatherm-Reaktant® 639.38 PUR Hot Melt Adhesive 14000 ± 2000 / 120 110 - 130 For manufacturing composite materials in the textile industry de en

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

Загрузки

Adhesive Portfolio for the Textile Industry.PDF