Suche

Ваш поиск "edgebanding" выявил 58 результата.

  1. Jowat-Toptherm® 237.50

    subject to hazard labelling requirements Premium edgebanding due to filler-free formulation – edgebanding with zero-joint appearance High strength data compared [...] compared to traditional EVA edgebanding, e.g. higher heat resistance and modern performance levels in thermoplastic edgebanding are looking for an alternative [...] Product Description Jowat-Toptherm ® 237.50 is an unfilled edgebanding adhesive based on polyolefin (PO), which impresses due to high heat resistance, outstanding
    /ru-RU/adhesives/hot-melt-adhesives/jowat-toptherm-po-hot-melt-adhesive/jowat-topthermr-23750/

  2. For highest demands in edgebanding: the new PUR hot melt Jowatherm Reaktant® 608.00.

    ts in edgebanding. Formulated with modern raw materials from the polyurethane chemistry and based on Jowat’s decades-long experience with edgebanding adhesives [...] adhesives, Jowatherm-Reaktant ® 608.00 fulfils the high expectations on edgebanding in modern furniture manufacturing. A translucent bondline, broad spectrum of [...] product that perfectly meets all visual and technical challenges in premium edgebanding. The processing characteristics and flowing properties of the new Jowat
    https://www.jowat.com/ru-RU/otdel-novostei/for-highest-demands-in-edgebanding-the-new-pur-hot-melt-jowatherm-reaktantr-60800/

  3. Jowatherm® 280.30

    Product Description The edgebanding adhesive Jowatherm ® 280.30 has been established on the market for more than two decades. Today, it is widely used by p [...] world due to its impressive bonding strength and high yield. An unfilled edgebanding adhesive based on a classic EVA (ethylene vinyl acetate) formulation, Jowatherm [...] for its versatility, the classic Jowatherm ® 280.30 bonds a broad range of edgebanding substrates and facilitates material combinations with a wide variety of
    /ru-RU/adhesives/hot-melt-adhesives/jowatherm-eva-hot-melt-adhesive/jowathermr-28030/

  4. Jowatherm-Reaktant® GROW 657.40

    40 Biobased PUR hot melt adhesive for edgebanding Downloads Application Our product in use Furniture Industry Edgebanding Building Elements Access Floor Manufacture [...] Reaktant ® GROW 657.40 contains 22 percent renewable raw materials. The edgebanding adhesive therefore provides a valuable contribution to the protection of [...] goals. At the same time, Jowatherm-Reaktant ® GROW 657.40 is a reactive edgebanding adhesive based on polyurethane which is characterized by high resistances
    /ru-RU/adhesives/biobased-adhesives/jowatherm-reaktantr-grow-65740/

  5. Successfully established on the market and now also available in granulate form: Jowatherm-Reaktant® 608.00 PUR for edgebanding.

    Jowatherm-Reaktant ® 608.00 has already been used successfully in edgebanding since the start of the year. Now, Jowat has introduced a granulate version of [...] of the unfilled PUR hot melt, which can be processed on all standard edgebanding units. The translucent adhesive film of this product provides an almost invisible [...] processors and smaller companies that want an adhesive which provides a superior edgebanding result from both a visual and a technical point of view.
    https://www.jowat.com/ru-RU/otdel-novostei/successfully-established-on-the-market-and-now-also-available-in-granulate-form-jowatherm-reaktantr/

  6. Jowatherm® 280.30 is a true classic.

    The edgebanding adhesive Jowatherm® 280.30 has been established on the market for more than two decades. Today, it is widely used by processors all around the [...] world due to its impressive bonding strength and high yield. An unfilled edgebanding adhesive based on a classic EVA (ethylene vinyl acetate) formulation, Jowatherm®
    https://www.jowat.com/ru-RU/otdel-novostei/still-plenty-of-power-jowathermr-28030/

  7. Low-temperature Hot Melt Adhesives for Edgebanding

    edgebanders as well as automatic edgebanding machines apply a hot melt adhesive to ensure a permanent bonding between the edgebanding material and the carrier board [...] melting the adhesive can be reduced significantly with the low-temperature edgebanding hot melts from Jowat. These adhesives lower the costs due to reduced en [...] Product Features Jowatherm ® 282.20/.30/.40/.60 for automatic and manual edgebanding machines. Wide range of applications, e.g. for PVC, ABS, PP, resinated paper
    /ru-RU/adhesives/hot-melt-adhesives/jowatherm-eva-hot-melt-adhesive/low-temperature-hot-melt-adhesives-for-edgebanding/

  8. For challenging ambient conditions: Fast-crosslinking PUR edgebanding adhesive Jowatherm-Reaktant® 607.10

    Jowatherm-Reaktant® 607.10 is an edgebanding adhesive that has been developed with a special focus on fast cross-linking reactions. The special formulation [...] humidity. The broad spectrum of adhesion facilitates the bonding of established edgebanding materials and good initial strength ensures a clean finishing. Jowather
    https://www.jowat.com/ru-RU/otdel-novostei/jowatherm-reaktantr-60710/

  9. Jowat-Toptherm® 221.00/80

    Application Our product in use Furniture industry Edgebanding Profile wrapping Building elements Edgebanding Profile wrapping
    /ru-RU/adhesives/hot-melt-adhesives/jowat-toptherm-22100/

  10. ZOW 2014: Leading adhesive technology for edgebanding

    providing perfect bonds with unsurpassed quality results on all standard edgebanding and panel products are the reactive PUR hot melt adhesives. Jowat has succeeded [...] for precoating of edgeband enables laser activation Traditional methods of edgebanding will still remain, but the trend towards activation by laser technology [...] superfine, almost invisible but hard bondline with excellent final strength. Edgebanding by laser technology is a very complex process, and only tailored precoating
    https://www.jowat.com/ru-RU/otdel-novostei/zow-2014-leading-adhesive-technology-for-edgebanding/

Сортировать по

Все фильтры удалить