Suche

the legal duties of the data controller arising from section 6(2) of DGUV provision 1, section 8(2) of the German Act on Occupational Health and Safety (Arbei [...] (Article 13 GDPR) Customer Trials A. Responsible: Jowat SE, Ernst-Hilker-Straße 10 – 14, 32758 Detmold, Germany, can be contacted by phone at: +49 (0) 5231 749-0 [...] . The legitimate interest in this processing operation arises from Article 6(1) point (c) fo the GDPR in conjunction with the aforementioned legal provisions

thus future-proof adhesive can be evaluated from various points of view (Figure 1): What is the raw material basis of the adhesive's formulation? What impact does [...] from pulp production residues. However, directly obtained tree resins (Figure 2) or terpene resins (Figure 3), which various citrus fruits, are also an option [...] adhesives have a very low content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24,

enterprise’s headquarters in Detmold. The new PV power station connects around 1,800 PV modules to the grid. Ralf Nitschke, member of the Board of Directors at [...] produced by the PV system is being used on site. Thereby, we can reduced our CO 2 emissions by an additional 200 tonnes.” Jowat has also been investing in renewable

® MR product range have a low content of diisocyanate monomers of less than 0.1 percent and are therefore free of hazard labeling requirements. They facilitate [...] topic at the Jowat SE booth at this year’s FILTECH in Cologne—hall 8, booth C10. Here you will find the possibility to register for the fair: Jowat at FILTECH

will find Jowat at FachPack in Nuremberg from 28 to 30 September in Hall 2 Stand 2-328. *Compared to other Jowat products for this application. [...] as well. The Detmold-based adhesives expert is fielding Jowat-Toptherm ® 256.10 as a premium all-rounder in the Jowat portfolio for tray, carton and box bonding

diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with a free monomer isocyanate content of 0.1 % or higher must be labelled with [...] information (H and P statements). Adhesives with an MDI content of less than 0.1 % are not subject to hazard labelling requirements. Jowat has successfully been

microplastiche primarie di tipo A, di tipo B e le microplastiche secondarie (Fig. 1). Queste ultime si formano a seguito della degradazione delle microplastiche [...] alto punto di fusione termoplastici con una dimensione minima orizzontale di 1,6 mm in entrambe le direzioni, uno spessore minimo del film di 120 μm e una [...] superiori ai 160°C. The article is published in the magazine "European Coatings 2/2021" in Italian language. You can download the original article down below.

timber structures like the new mosque in Cambridge, England, or the Swatch S1 office building in Biel are the result of those extraordinary feats of engineering [...] why Blumer Lehmann has been using high-performance adhesives like Jowapur® 687.10, 687.30 and 687.60 for many years, especially in free-form wood construction [...] completely unfilled. A short explanation: Construction adhesives with a density of 1.3 g/cm³ and more are considered highly filled products. Such adhesives usually

for their process and realise an assembly time-pressing time ratio of up to 1:1. Jowat is convinced that this flexibility will allow a targeted optimisation [...] The product family Jowapur 681.10 – 681.60 supplied by the adhesives manufacturer Jowat from Detmold is certified according to EN 15425:2017 and provides a [...] Industrial processors can select freely from adhesives with assembly times between 10 and 60 minutes. Therefore they can choose the product that best meets the re

provide a choice of assembly times between 10 and 60 minutes, and facilitate an assembly time-pressing time ratio of up to 1:1. Industrial processors can therefore [...] an ideal choice from an environmental point of view. Wood is a sustainable CO2 sink and thus actively supports the fight against global warming. The article