Suche

The Board of Directors of Jowat SE stresses that the installation of the photovoltaic systems is further step towards the successful implementation of the United [...] lity of bonding is an integral objective of the Jowat principles. Resource conservation is of crucial importance in that regard and to this end Jowat focuses [...] connects around 1,800 PV modules to the grid. Ralf Nitschke, member of the Board of Directors at Jowat SE: “The electricity produced by the PV system is being used

years, the adhesives manufacturer from Detmold presents the Jowat Adhesives Research Award to honour outstanding solutions and approaches in the field of adhesive [...] the earliest possible identification of error causes; the adjustment of process parameters; and a predictable maintenance of relevant plant technology. The jury [...] by the Chair of Materials and Joining Technology at the University of Paderborn under Professor Dr Gerson Meschut and the Leiden Institute of Advanced Computer

customers around the world, and Jowat’s Biobased GROW adhesives are an innovative development in reducing the consumption of fossil fuel,” said Brian Sufak, [...] applaud Jowat Corporation for earning the USDA Certified Biobased Product label,” said Kate Lewis, USDA BioPreferred Program. “Products from Jowat Corporation [...] communities, and decreases our reliance on petroleum.” Under this program, the adhesive’s Biobased content is verified by a third party laboratory, with the content

which verifies the human-ecological safety of textiles. Thereby, it facilitates the choice of e.g. suitable adhesives for products manufactured in accordance with [...] classes based on the intended use of the textile. The more intensive the skin contact of a product and the more sensitive the skin of the corresponding target group [...] therefore the limits which must be complied with. All tested Jowat adhesives can be used for the manufacture of textiles in the category with the highest requirements

Makina. “And Jowat has a very good reputation as an adhesive manufacturer.” Ata Burak Yucel is a Territory Sales Manager at the Turkish subsidiary, Jowat Atasoy. [...] provided a sample of the adhesive for test runs. The first trials were successful, leading to the customer’s decision to work with the Jowat product. “It was [...] our minds,” explains Nurdan Yücel. “The application expertise of the team and the know-how of the technical advisors impress us too.” Ductile cast pipes have

glue station problems caused by premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing [...] exposed to humidity for an extended period of time, premature crosslinking / pre-curing may take place in the outer layer of the adhesive. This will produce an invisible [...] technical and safety documentation for more details. Planning of batch sizes will allow optimal yield of the hot melt cartridges and reduce waste. The daily production

glue station problems caused by premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing [...] exposed to humidity for an extended period of time, premature crosslinking / pre-curing may take place in the outer layer of the adhesive. This will produce an invisible [...] technical and safety documentation for more details. Planning of batch sizes will allow optimal yield of the hot melt cartridges and reduce waste. The daily production

glue station problems caused by premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing [...] exposed to humidity for an extended period of time, premature crosslinking / pre-curing may take place in the outer layer of the adhesive. This will produce an invisible [...] technical and safety documentation for more details. Planning of batch sizes will allow optimal yield of the hot melt cartridges and reduce waste. The daily production

glue station problems caused by premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing [...] exposed to humidity for an extended period of time, premature crosslinking / pre-curing may take place in the outer layer of the adhesive. This will produce an invisible [...] technical and safety documentation for more details. Planning of batch sizes will allow optimal yield of the hot melt cartridges and reduce waste. The daily production