Suche

the textile industry. Due to a free monomer isocyanate content of less than 0.1 percent, the hot melt adhesive is not subject to hazard labeling and does therefore

® MR product range have a low content of diisocyanate monomers of less than 0.1 percent and are therefore free of hazard labeling requirements. They facilitate [...] topic at the Jowat SE booth at this year’s FILTECH in Cologne—hall 8, booth C10. Here you will find the possibility to register for the fair: Jowat at FILTECH

timber structures like the new mosque in Cambridge, England, or the Swatch S1 office building in Biel are the result of those extraordinary feats of engineering [...] why Blumer Lehmann has been using high-performance adhesives like Jowapur® 687.10, 687.30 and 687.60 for many years, especially in free-form wood construction [...] completely unfilled. A short explanation: Construction adhesives with a density of 1.3 g/cm³ and more are considered highly filled products. Such adhesives usually

for their process and realise an assembly time-pressing time ratio of up to 1:1. Jowat is convinced that this flexibility will allow a targeted optimisation [...] The product family Jowapur 681.10 – 681.60 supplied by the adhesives manufacturer Jowat from Detmold is certified according to EN 15425:2017 and provides a [...] Industrial processors can select freely from adhesives with assembly times between 10 and 60 minutes. Therefore they can choose the product that best meets the re

provide a choice of assembly times between 10 and 60 minutes, and facilitate an assembly time-pressing time ratio of up to 1:1. Industrial processors can therefore

the choice of assembly times between 10 and 60 minutes and facilitate an assembly time-pressing time ratio of up to 1:1. Jowat SE’s presence at the trade fair [...] craft and industry – at the Jowat booth at Holzhandwerk in Nuremberg, from 18 to 21 March 2020, hall 11.0 booth 302.

choice of assembly times between 10 and 60 minutes, and for the first time facilitate an assembly-pressing time ratio of 1:1. Industrial users can therefore

sprayed liquid consists of a water/alcohol (ethanol) mixture. The mixing ratio is 10:1. 7. Start the mixer in the container filled with Jowacoll ® 764.xx. Then add [...] finishing applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical [...] in downline processing, the recommended amount of crosslinker to be added is 1.5 – 5 %. This applies especially if downline processing involves one of the

(PDF) Jowat ® 930.60 Cleaning Agent colourless, fluid approx. 180, max. 190 1,1 Cleaning heavily soiled metal parts (nozzles, rollers, filters, etc.). Detaches [...] either the new adhesive itself or with Jowat ® flushing agent 931.00 or 931.10 depending on the viscosity of the adhesive to be purged. In addition, the filters [...] used for applying PO or EVA hot melt adhesives. (NOT PUR) de en fr Jowat ® 931.10 Flushing Agent colourless translucent 8200 / 190 190 0,9 / 23 95 For flushing

(PDF) Jowat ® 930.60 Cleaning Agent colourless, fluid approx. 180, max. 190 1,1 Cleaning heavily soiled metal parts (nozzles, rollers, filters, etc.). Detaches [...] either the new adhesive itself or with Jowat ® flushing agent 931.00 or 931.10 depending on the viscosity of the adhesive to be purged. In addition, the filters [...] used for applying PO or EVA hot melt adhesives. (NOT PUR) de en fr Jowat ® 931.10 Flushing Agent colourless translucent 8200 / 190 190 0,9 / 23 95 For flushing