Suche

Ваш поиск "cycle" выявил 11 результата.

  1. Under One Roof

    reliably hold up to the demanding requirements placed on the laminate—with short cycle times, a wide adhesion spectrum and high final strength, they open the door
    https://www.jowat.com/ru-RU/otdel-novostei/under-one-roof/

  2. Jowatherm® 250.00

    processes. The manufacturing process is characterized by special conditions: fast cycle times, low application amounts coupled with the requirement for high initial
    /ru-RU/adhesives/hot-melt-adhesives/jowatherm-eva-hot-melt-adhesive/jowathermr-25000/

  3. Jowat® 900.00

    Application: For cold and hot pressing For single- and multi-daylight presses, fast-cycle presses, mold presses, and veneering presses For machine parts (e.g. pressure
    /ru-RU/adhesives/cleaning-and-flushing-agents/jowatr-90000/

  4. Jowat® 975.30 Instant Adhesives

    https://www.jowat.com/ru-RU/otdel-novostei/jowatr-97530-instant-adhesives/

  5. 100 years of Jowat

    assembly time-pressing time ratio for industrial production processes with rapid cycle times and throughput speeds. In the packaging industry, Jowat’s brand new adhesives
    https://www.jowat.com/ru-RU/otdel-novostei/100-years-of-jowat/

  6. Sticking PUR - mattress bonding with Jowatherm-Reaktant® 639.20

    minutes.” The use of PUR not only minimises storage periods and thereby increases cycle rates, it also only requires a significantly lower amount to achieve exceptional
    https://www.jowat.com/ru-RU/otdel-novostei/sticking-pur-mattress-bonding-with-jowatherm-reaktantr-63920/

  7. Jowat SE: Successful product launches at Interzum and Ligna

    interest among customers with industrial manufacturing processes in which short cycle times and fast throughput speeds are essential. The adhesives manufacturer
    https://www.jowat.com/ru-RU/otdel-novostei/jowat-se-successful-product-launches-at-interzum-and-ligna/

  8. Understanding – Bonding – Performing: Strong support for a smooth adhesive change

    requirements. This is followed by an extensive advisory on the entire process cycle of an adhesive change or introduction. For that purpose, more than 30 adhesive
    https://www.jowat.com/ru-RU/otdel-novostei/understanding-bonding-performing-strong-support-for-a-smooth-adhesive-change/

  9. Пищевая и потребительская промышленность

    matched by the speed in the packaging process. They are characterised by short cycle times in highly efficient processes, flexible format changeovers for the fast
    /ru-RU/primenenie/pishchevaja-i-potrebitelskaja-promyshlennost/

  10. Protection against mineral oil migration: Barrier coating on cardboard packaging

    For instance, the paper and packaging industry uses wastepaper not only for image but also for cost reasons to manufacture all kinds of secondary packaging as well as bags or boxes for food. However,
    https://www.jowat.com/ru-RU/otdel-novostei/protection-against-mineral-oil-migration-barrier-coating-on-cardboard-packaging/

Сортировать по

Все фильтры удалить