Suche

ABS and PP edgebands. Application by gravure or smooth roller. Product Features ✓ Advantages Primer Jowat ® 408.48 provides special benefits for ABS and PP edgebands: [...] (THF) and N-Ethylpyrrolidone (NEP), and has been developed particularly for PP and ABS edgebands. Following many decades of experience with edgeband primers [...] processed properly, bites the ABS but does not dissolve. Very good adhesion on PP with Corona pretreatment and 3 % Jowat Crosslinker 498.00. Chlorine-free – therefore

open time, high initial strength and good adhesion to materials based on PP (e.g. NF-PP). The product is block-free and is used for precoating decors as reel material [...] The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension

/ 200 180 - 200 For flat lamination, for instance of substrates based on PP (NF-PP) in the automotive industry, also edgefolding operations. Also for precoating [...] Соединений и запотевания 1 Обивка двери Материалы (примеры): Подложки: ABS, PP, PC/ABS Декоративные элементы: Натуральная кожа, пленки ПВХ, пленки из вспененного [...] Jowapur ® 158.97 3 Карман обивки двери Материалы (примеры): Подложки: AABS, PP, PC/ABS, PC Пеноматериалы: Объемное полотно, Различные пеноматериалы Декоративные

The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension [...] extremely high heat resistance and a very wide range of adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance

Jowat ® 408.48 PU 53,5 ± 2,5 / 20 13 ± 1,5 / 90 PP, PET, ABS de en Jowat ® 408.40 PU 35 ± 5 / 20 15 ± 2 / 90 ABS, PP de en water based primer Base Viscosity [mPas] [...] 409.12 PU 650 / 20 33.5 PVC, ABS, PP, PMMA, PET, Alu / Stainless steel de en fr Jowat ® 409.45 PU 200 / 20 28 PVC, ABS, PP, PMMA, PET de en The products listed

bonded – from ABS and ABS blends to PP-based parts, with or without natural fibre content. Pretreatment is only necessary for PP-based parts. Jowatherm-Reaktant

this series. The PUR hot melt is suitable for bonding standard edgebands (ABS, PP, PVC, veneer, resinated paper) on throughfeed lines. Application Description [...] Wide field of application, e.g. edges made of HPL/CPL, polyester, PVC, ABS, PP, resinated paper, solid wood or veneer. Jowat ® 930.94 is a corresponding flushing

product group. These adhesives ensure a strong bond on all standard plastics (PET, PP and PVC). In addition, the PUR hot melts are transparent, provide an optimum

® 745.60 also impresses with a good adhesion to acetate films and pretreated PP films. Jowacoll ® 745.60 can be processed with all established application systems

with a wide field of application, e.g. edges of HPL/CPL, polyester, PVC, ABS, PP, resinated paper, solid wood or veneer. Downloads Application Our product in