Suche

Ваш поиск "distriutors+on+jowat+adhesives" выявил 238 результата.

  1. Jowat AG at the Hannover Messe 2014. - Practical Demonstration: Jowat casting compound in low-pressure injection moulding

    well as moulding properties. On a low-pressure injection moulding line by TuTes GmbH Hotmelt- und Expansionstechnologie, Jowat AG gives a live demonstration [...] visitors may take home. Apart from the casting compounds, Jowat supplies a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores [...] roboterized manufacture of cast engine components. The Adhesives Technology theme park is located in hall 6, Jowat AG has the booth No. B 45/1 at the joint exhibition
    https://www.jowat.com/ru-RU/otdel-novostei/jowat-ag-at-the-hannover-messe-2014-practical-demonstration-jowat-casting-compound-in-low-pressu/

  2. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    impact resistance (Shore hardness) of Jowat-Toptherm® 236.30 reduces pattern transfer on the surface which might occur on laminated components when stacked. This [...] of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin [...] the sector surface lamination, PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for example
    https://www.jowat.com/ru-RU/otdel-novostei/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  3. Jowat bonds foam for sweet dreams: New Jowat adhesive for mattress manufacture

    New: Jowat-Toptherm® for mattress manufacture This newcomer to the product group of Jowat-Toptherm® adhesives was developed specifically for industrial mattress [...] manufacture. It exhibits a low processing viscosity, which allows excellent wetting on flexible foam elements, wood-based substrates, cover materials, innerspring cores [...] increased production speeds and efficiency. Thanks to the wide processing window, Jowat-Toptherm® is suitable for the combination of a wide variety of materials for
    https://www.jowat.com/ru-RU/otdel-novostei/jowat-bonds-foam-for-sweet-dreams-new-jowat-adhesive-for-mattress-manufacture/

  4. New formula: Thermoplastic adhesives for high-quality lamination of wood-based substrates – for general use with all common laminating machines using in- or offline application.

    from the product family of Jowat-Toptherm® permit a homogenous adhesive application without any striping effect. Depending on the quality of the surface of [...] stress is exerted on the freshly laminated parts – e.g. stack pressure directly after manufacture. These new members of the product family of Jowat-Toptherm® are [...] to the conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive bondlines with a degree of hardness tailored
    https://www.jowat.com/ru-RU/otdel-novostei/new-formula-thermoplastic-adhesives-for-high-quality-lamination-of-wood-based-substrates-for-gene/

  5. Jowat AG – ZOW 2013: Intelligent bonding systems 3.0 Industrial adhesives with functional added values

    properties are required – on water and on land – Jowat adhesives are used. Customers not only benefit from the product performance but also rely on a competent advisory [...] perfor-mances of the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced [...] One of the marks of quality is the surface hardness of a coating. Adhesives of the Jowat-Toptherm® product range have outstanding impact resistance (Shore hardness)
    https://www.jowat.com/ru-RU/otdel-novostei/jowat-ag-zow-2013-intelligent-bonding-systems-30-industrial-adhesives-with-functional-added-valu/

  6. Clean air in the passenger compartment: Jowat adhesives for the manufacture of filter media

    a filter is depends largely on the absorption capacity of its filtering medium: The innovative laminating adhesives from Jowat AG ensure optimum filtering [...] substrates: This prevents any negative impact on the filtering capacity of the medium itself. The adhesives developed by Jowat for attaching the activated charcoal are [...] Exactly this formula was adopted when developing the new Jowat-Toptherm® and Jowatherm-Reaktant® adhesives. With these products, very good results are achieved
    https://www.jowat.com/ru-RU/otdel-novostei/clean-air-in-the-passenger-compartment-jowat-adhesives-for-the-manufacture-of-filter-media/

  7. Filters in top shape: Jowatherm® and Jowat-Hightherm® for pleating and frame bonding

    mechanical and thermal stresses. Pleating: The new Jowatherm® and Jowat-Hightherm® adhesives support the high-speed manufacturing processes of pleating by their [...] media without intermediate storage. In addition, both Jowatherm® and Jowat-Hightherm® adhesives have a wide spectrum of adhesion and allow secure bonding of substrates [...] of applications reduces setup times in production. Jowatherm® and Jowat-Hightherm® adhesives keep the filter media in shape and are responsible to a large extent
    https://www.jowat.com/ru-RU/otdel-novostei/filters-in-top-shape-jowathermr-and-jowat-highthermr-for-pleating-and-frame-bonding/

  8. Jowat AG at the Filtech Strong performance record: New adhesives for the filter manufacture

    frame bonding The adhesives from the group of Jowat-Hightherm® are especially used for pleating due to their excellent adhesion properties on paper and fleece; [...] process of filter media with activated charcoal, the new Jowat-Toptherm® and Jowatherm Reaktant® adhesives guarantee highest performance with the lowest adhesive [...] The efficient manufacture of filter systems requires modern adhesives that are tailored to fit the diverse manufacturing steps of lamination, pleating and frame
    https://www.jowat.com/ru-RU/otdel-novostei/jowat-ag-at-the-filtech-strong-performance-record-new-adhesives-for-the-filter-manufacture/

  9. Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

    interiors using reactive hot melt adhesives In laminating processes for car interiors with reactive hot melt adhesives based on polyolefin (POR), the production [...] for components with complicated designs. Both the Jowat-Toptherm® adhesives and Jowatherm-Reaktant® based on polyolefin are already in serial production at well-known [...] precoating of decor materials - either pre-cut or on reels – with polyamide (PA) or polyester hot melt adhesives (PES) has been used in automotive interiors for
    https://www.jowat.com/ru-RU/otdel-novostei/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

  10. Techtextil 2013: New thermoplastic and reactive adhesives for more process reliability in the manufacture of technical textiles.

    insulation on reels, Jowat AG is introducing a PO hot melt of the Jowat-Hightherm® product family which provides excellent adhesive properties on the substrate [...] Whether based on polyolefin (PO) or polyurethane (PUR), whether thermoplastic or reactive: The new hot melt adhesives from Jowat AG have been developed especially [...] thermal stress on the PVC foil and thereby increasing process reliability in the manufacture of PVC tablecloths. The adhesives supplied by Jowat AG for the assembly
    https://www.jowat.com/ru-RU/otdel-novostei/techtextil-2013-new-thermoplastic-and-reactive-adhesives-for-more-process-reliability-in-the-manufa/

Сортировать по

Все фильтры удалить