Suche

processes. For side edges and milled areas, the dispersion is applied twice. The first layer is applied to close the small pores and fibres on the cutting edge and [...] lamination guaranteed After a short drying time, a second layer of adhesive is applied before the foil is laminated. To ensure a uniform result, the application [...] to the series is the 1K PU dispersion Jowapur® 150.93. The adhesive can be applied by atomised spraying at low processing temperatures, making it a great choice

471.64 can be applied by spraying and has good initial strength. Surface tack disappears after a relatively short time already. It can be applied to either one

dispersed silica acid which expands the surface and facilitates a permanent bond. Applying an primer which is compatible with the specific adhesive is often the most [...] resistance and permanent tack of the surface finishing. Primers are usually applied in a thin film to ensure a proper drying of the coating. Due to the long-lasting [...] some substrates may require an “oxidative pretreatment” before the primer is applied. Adhesion to the substrate and the cohesion of the primer film can be improved

in the development of Jowacoll ® 114.60 was to ensure that the glue can be applied cleanly on fully automatic doweling machines with nozzle applicators.

Description In addition to providing anti slip properties, adhesives are also applied as spacers to protect goods against scratches and breaking during transport [...] transport and storage. Jowat Toptherm ® hot melts, for instance, are applied to the underside of roofing tiles and even glass as spacers. These adhesives provide a

After the book block has been milled on the back, the following step is to apply an adhesive film on the spine by nozzles or roller. For this process, several [...] speed? 2. Side glue Hot melts / dispersions / PUR In general, the adhesive is applied by nozzle or roller on the first and on the last page of the book block, to

are usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] additive developed by Fraunhofer IFAM to the adhesive which, when a DC voltage is applied, enables adhesive weakening and simplified dissolution of the bond. Since

strength, good creep resistance as well as low VOC and FOG values, and can be applied with the application technology established in the industry. Lamination of [...] adhesive also impresses with minimal stringing at low processing temperatures if applied by roller. Jowat has successfully developed alternative technologies for the

by a permanent tackiness. Bonds are made by applying pressure on the adhesive film – the more pressure is applied, the better is the adhesion. Pressure-sensitive

performance and process quality. Traditional hot melt adhesives are generally applied at temperatures of up to 180°C. Jowat-Toptherm ® 851.99 has been optimized [...] sustainable due to a DIN-verified biobased raw material content of 33% and can be applied in different packaging processes at reduced temperatures starting from 120°C