Suche

application of all the manufacturing factors such as adhesive application quantity, sufficient drying, optimum press parameters and, not least, quality control to [...] three-dimensional surfaces can be improved significantly by choosing the right adhesive and laminates. But there are a huge number of stumbling blocks that must be [...] After a short drying period, another coating is added to this layer. The adhesive amount is increased in joints and ornamental three-dimensional surfaces for

diminishing quality, the adhesive must provide sufficient adhesion to the substrates and the initial strength (i.e. cohesion of the adhesive) must be higher than [...] is pressed to the substrate by a roller and/or a flat press (stacking pressure). The suitable adhesive and processing parameters are chosen depending on the [...] the adhesive must be applied homogeneously to the bonding partner and irregularities in the substrate surface have to be evened out with the adhesive to create

and Hannover (Germany) focuses on four adhesive solutions on current topics in the packaging industry. Four smart adhesive solutions for four difficult challenges: [...] manufacture of sealing tape are further applications for Jowat adhesives. All Jowat press releases as well as detailed product information are available under the following

full-source supplier of adhesive for all applications in the woodworking industry and trade, will present a comprehensive adhesive portfolio at the HOLZ-HANDWERK [...] groups: A reactive PUR adhesive for water-resistant edgebanding, suitable for kitchens and bathrooms; a 2-component silane epoxy resin adhesive for joining the most [...] modified wood for exterior use. PUR hot melt adhesive for edgebanding Jowatherm-Reaktant ® : An all-purpose reactive adhesive system, which can be used whenever high

applied by roller, nozzle or spraying, laminated with a press or by vacuum deep-drawing – the same adhesive should be used in all processes and fulfil the different [...] Therefore, low-emission adhesives are an important part of the Jowat Green Adhesive portfolio. E mission r educed (ER) adhesives with very low emissions of f [...] eaktant ® 642.00/08 has been developed to meet all demands with only one adhesive Consistency and standardisation. These objectives of the modular production

Description Jowatherm-Reaktant ® 642.30 is a universal, powerful PUR hot melt adhesive for the lamination of three-dimensional parts in automotive interiors. Wide [...] test Processing methods: By spraying By roller By nozzle Vacuum deep-drawing Press laminating Range of materials*: PC/ABS carrier ABS carrier PP carrier (pretreated) [...] Headliners Pillar trims Product Features Jowatherm-Reaktant ® 642.30 PUR hot melt adhesive for laminating three-dimensional parts in automotive interiors. Downloads

storing of the adhesive. Versatility. For a more elastic glue line with improved adhesion (e.g. for difficult-to-bond veneers), the adhesive can be mixed with [...] bonding. Product Features ✓ Advantages Simplicity. The powder form of the adhesive provides a major advantage in countries with extreme climatic conditions (very [...] . Cold-curing adhesives can be processed without additional energy (no hot press required) Downloads Application Our products in use Furniture Industry Flat

pressing time was around 1:3 to 1:4. As a result, the time remaining for adhesive application on large-surface laminated timber, which is the process step crucial [...] crucial for the quality of the end product, was very limited. The time in the press for setting/pressing, however, was comparatively long, with the respective

serial processes, for instance by using press lamination, to the respective base materials. The precoated hot melt adhesive is in these cases reactivated by heat [...] wetting with adhesive. In most cases a surface pretreatment used to be absolutely necessary. The development of the new POR hot melt adhesive now allows to [...] which makes the costly injection moulding obsolete. The challenge for the adhesive industry is now to ensure that these new NFPP substrates with their low surface

performance and, therefore, the adhesive is characterised by significantly optimised product and processing properties. The hot melt adhesive provides a considerably [...] systems, with superior results in every case. The new hot melt adhesive is suitable for press lamination as well as for vacuum deep-drawing. Long dwell times [...] and provides superior quality, which previously required several different adhesive products. The key focus during the development of Jowatherm-Reaktant ® 642