Suche

"called" sonuçlarına yönelik aramamız returned 26 results.

  1. Demanding surface lamination: High-tension bonding

    initial strength immediately after the lamination process. Therefore, a short so-called “open time” of the adhesive is necessary. Apart from the energy input, the
    https://www.jowat.com/tr-TR/haber-odas-detay/demanding-surface-lamination-high-tension-bonding/

  2. Green Adhesives for Modern Building Elements

    press forward with feasible efforts to double the renovation rate by 2030 as called for by the European Commission. Only this way can be ensured that the technology
    https://www.jowat.com/tr-TR/haber-odas-detay/green-adhesives-for-modern-building-elements/

  3. Kenar bantlama

    will usually lead to a fast increase in viscosity of the melt due to a so-called thermal crosslinking reaction in the adhesive (the allophanate reaction), which
    /tr-TR/uygulamalar/mobilya-sektoerue/dolap-sistemleri/kenar-bantlama/

  4. Diisocyanates - Things to consider in future

    How PUR hot melt adhesives can be used in future For many years, Jowat has been developing and manufacturing reactive hot melt adhesives for the most different fields of application. Reactive hot melt
    https://www.jowat.com/tr-TR/haber-odas-detay/diisocyanates-things-to-consider-in-future/

  5. Insight Into the Jowat History: A Plot was Pruchased

    https://www.jowat.com/tr-TR/haber-odas-detay/1964-a-new-plot-was-pruchased/

  6. The Name’s Beam – New Beam

    Around the world, not only is the general demand for energy increasing, but also the demand for green electricity. In 2019, for example, more than 40 percent of the electricity generated in Germany ca
    https://www.jowat.com/tr-TR/haber-odas-detay/the-names-beam-new-beam/

Sıralama Türü