Suche

"require" sonuçlarına yönelik aramamız returned 7 results.

  1. Carrying a lot of weight - Multifaceted adhesives for load-bearing glulam

    because of their characteristics. They are completely free of formaldehyde and require significantly lower application amounts due to a solids content of 100 %.
    https://www.jowat.com/tr-TR/haber-odas-detay/carrying-a-lot-of-weight-multifaceted-adhesives-for-load-bearing-glulam/

  2. Dispersions at work – versatile and trusted wood adhesives

    must be protected by an adequate surface coating. Moisture-resistant bonds require special reactive one- and two-component D4 dispersions. That latest generation [...] polymer isocyanate) adhesives have been tried and tested in applications that require durability class D4, in particular joints that are exposed to direct weathering
    https://www.jowat.com/tr-TR/haber-odas-detay/dispersions-at-work-versatile-and-trusted-wood-adhesives/

  3. Green Bonding Processes

    content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24, 2023, at the latest, there will
    https://www.jowat.com/tr-TR/haber-odas-detay/green-bonding-processes/

  4. High-performance gluing - Certified PUR adhesives for load-bearing glulam

    solvents, are free of emissions and completely odourless when fully cured, and require considerably lower application amounts due to a solids content of 100 %. Depending
    https://www.jowat.com/tr-TR/haber-odas-detay/high-performance-gluing/

  5. PVC window profile wrapping: Jowat expands portfolio of adhesive systems

    increasing requirements New, more rigid foils used in PVC window profile wrapping require adhesives with very special properties. The newly launched adhesive is ch
    https://www.jowat.com/tr-TR/haber-odas-detay/pvc-window-profile-wrapping-jowat-expands-portfolio-of-adhesive-systems/

  6. Sustainable Bonding with Packaging Hot Melt Adhesives

    consumption can thus be reduced significantly compared to standard systems that require temperatures above 160 °C. The article is published in the magazine "holz
    https://www.jowat.com/tr-TR/haber-odas-detay/sustainable-bonding-with-packaging-hot-melt-adhesives/

  7. Sustainably manufactured adhesives and efficient processing for box spring beds, foam mattresses and pocket innerspring mattresses

    manufactured in a wide variety of material combinations and qualities, which require very versatile manufacturing processes. Since these products are assembled
    https://www.jowat.com/tr-TR/haber-odas-detay/sustainably-manufactured-adhesives-and-efficient-processing-for-box-spring-beds-foam-mattresses-and/

Sıralama Türü

Remove all filters