Suche

simplifying the lamination process for 3D surfaces. Several years ago, the enterprise revolutionised the laminating process for 3D furniture by developing one-component [...] While country style furniture may have become something of a rarity, 3D fronts continue to fascinate – they just follow new trends. Most furniture is based [...] together with manufacturers like Jowat and Wemhöner have therefore published the “3D Furniture Front Production – Quality Guide”, a guideline on the appropriate handling

provides adhesives from D3 dispersions according to EN 204/205 for interior applications with short-term water exposure or high humidity to D4 dispersions for interior [...] durability class D3. Two-component EPI (emulsion polymer isocyanate) adhesives have been tried and tested in applications that require durability class D4, in particular [...] to which it will be exposed during use. A comprehensive portfolio of powerful D4 dispersions and EPI dispersions helps processors meet the different requirements

are used in the formulation of the adhesive? What impact does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding [...] could be a health concern. For example, Jowat has successfully developed D3 and D4 dispersion adhesives with significantly reduced formaldehyde emissions compared [...] the existing building stock for the future within the set time frame.” The adhesive manufacturer Jowat draws on extensive expertise in the manufacture of building

cost-effectiveness as a conventional fossil-based adhesive. The success of a sustainable and thus future-proof adhesive can be evaluated from various points of view [...] view (Figure 1): What is the raw material basis of the adhesive's formulation? What impact does the adhesive used have on consumers? What effects does its use have [...] basis for an environmentally friendly adhesive formulation. The aim is to replace as many components of the adhesive formulation as possible – for example,

Der Fachartiktel ist am 01.09.2014 in der Fachzeitschrift Furniture Journal Ausgabe 9|2014 erschienen. Den gesamten Artikel können Sie unten als PDF herunterladen.

restoring forces and are therefore usually the product of choice for laminating 3D-shaped floors made from honeycomb polyurethane boards reinforced with fibre glass [...] lamination process by In-Mould-Graining (IMG). The comprehensive range of adhesive systems supplied by Jowat, the adhesives specialist from Detmold, provides [...] consisting of diverse material combinations bonded together with different adhesive systems. For instance, armrests with integrated door openers which are laminated