Suche

Jowacoll® 110.00 assembly adhesive, an adapted Jowatherm® 288.xx series EVA hot melt adhesive for edgebanding, and a plastics adhesive for small repairs. Wolfgang [...] When put to the test on a double-sided IMA edge laminating machine, the PO hot melt adhesive outshone the product Nolte had previously been using. The changeover [...] Jowat adhesives for the automated bonding of handle strips—the colorless PUR hot melt adhesive Jowatherm-Reaktant® 608.00 and the Jowacoll® 114.80 adhesive, to

were purchased in 1994 already. At the beginning, 11 employees manufactured hot melt adhesives as well as dispersion adhesives and release agents at the plant [...] of processes ensure that the continuously growing demand, particularly for hot melt adhesives, primers/adhesion promoters and solvent-based adhesives, can be

(see interview on p. 20). “The decision to use Jowat’s monomer-reduced (MR) hot melt adhesives was an obvious one for us,” emphasises purchasing manager Sonja [...] with HPL laminate or real wood veneers. ALBO has been purchasing several hot melt adhesives and the associated cleaners from Jowat for some time now. But what’s

explains: “The filter medium is pleated for this purpose and fixed with a hot melt adhesive. This maximises the filter area within the available space.” Adhesives [...] with a suitable open time as well as high initial strength. In addition, the hot melt adhesives are strong when cooled down, while also being flexible enough to

bio-based adhesives. This is because the Head of Development of Thermoplastic Hot Melt Adhesives is certain: “If one global player pays attention to sustainable [...] comparable formulations, this proportion is usually only a few percent. “No hot melt adhesive contains more bio-based raw materials while offering the same performance

range of optimization options when it comes to coating roof linings. PUR hot melt adhesives are the perfect choice for moistureresistant bonds that also need [...] candidate for effective use in the field of construction textiles is the PUR hot melt adhesive Jowatherm-Reaktant® 630.20. Due to its low-viscosity formulation [...] common type of adhesive used for bonding construction textiles is strong PO hot melts. While the adhesive is applied over a large area when using a laminate

growth for us,” explains Tim Martin. “With our Jowatherm® 250.00 and 250.85 hot melt adhesives for bonding closure systems to beverage cartons, not to mention [...] relied on Jowat’s expertise, for example in the progressive switch to PUR hot melt adhesives as a state-of-the-art solution in the field of edgebanding. After [...] joint’ meant further quality advances could be achieved with the unfilled PUR hot melt adhesive. Read the whole story and other interesting articles in our customer

Diisocyanates play an important role in the application of PUR hot melt adhesives, but they have to be handled correctly to avoid a negative impact on health

robots, as well as with the help of a non-reactive, purely thermoplastic hot melt adhesive. Small step, big effort The consortium of the three Fraunhofer Institutes

simpler. Target: Innovation Due to its monomer-reduced formulation, the PUR hot melt with hazard-free labelling is easier to use than similar products. Unlike