Suche

adhesives of the Jowacoll ® series are among the efficient alternatives due to lower VOC emissions and therefore a reduction of harmful ingredients. The portfolio of [...] veneer require another adhesive compared to non-absorbent substrates with a low surface tension. An example for this are bonding operations involving materials [...] role. Also, one of the substrates needs to be absorbent. High temperatures and low humidity reduce the assembly and Pressing times. The minimum film-forming t

duyarız. "Low VOC ve FOG yapıştırıcıların" avantajları "Low VOC ve FOG yapıştırıcılar" otomotiv üreticilerinin teslimat şartlarını karşılar Düşük oranda VOC ve FOG [...] Teknik veriler ☟ Choose a product group Low Formaldehyde Dispersions Low VOC and FOG Adhesives MOSH/MOAH-free Low Formaldehyde Dispersions Base Application [...] hafif otomobiller sağlamaktadır. Buna ek olarak, Jowat'ın düşük VOC ve FOG değerlerine sahip “Low VOC ve FOG yapıştırıcıları", araç kabinindeki hava şartlarının

Jowatac ® 476.70/74. The very high solids content of approx. 74 % and a relatively low viscosity at the same time are a novelty. The bonding characteristics, such [...] suitable for high tension bondings One- and two-sided application possible Reduced VOC emissions by up to 60 % compared to conventional products Good heat resistance

Therefore, low-emission adhesives are an important part of the Jowat Green Adhesive portfolio. E mission r educed (ER) adhesives with very low emissions of [...] and other ingredients support manufacturers in the production and bonding of low-emission products. For a contribution to environmental and customer protection [...] well as PVC foils.* All these qualities coupled with particularly favourable VOC and FOG values make this PUR hot melt adhesive a real “all-rounder” and a reliable

Jowatherm-Reaktant ® MR 604.90 can be used in combination with the NEP-free and low VOC Primer Jowat ® 406.84 or with Primer Jowat ® 406.78 (MEK-based). Those two

verified and it has been awarded the DIN-tested biobased 20 – 50 % (8C183) certification mark. In addition to its high content of renewable raw materials, the adhesive [...] the working environment. Jowatherm ® GROW 853.20 is also characterised by very low stringing and clean adhesive cut-off, which prevents the waste of adhesive and [...] for example coated material surfaces. In addition, its high flexibility at low temperatures benefits deep-freeze applications. Technical Data - Viscosity [mPas]

materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion [...] materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion [...] materials. Also for expanded polystyrene. High solids content, therefore low VOC emissions and minimal odour. Good spraying properties, good initial adhesion