Suche

roof. With a span of 15 metres, the wood-concrete-composite ceiling is so far the biggest of its type in Germany. This year’s symposium ended with a ceremony [...] customers” concept, provided a more than worthy framework for this year’s symposium. The lectures session was started by “lignotrend”, a manufacturer of cross-laminated [...] offers workplaces for 45 Jowat employees. Based on a glued laminated timber frame, the building also has a unique design: Outside, on the surrounding walkway

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

light: a clear plus compared to solid wood panels. For additional stability, the lightweight panels are given a frame of solid wood slats. VOMO & Jowat: a strong [...] and Johannes Voß arranged a Christmas present all for themselves back in December 2001, as they set up their own business and founded a company for lightweight [...] paper honeycomb cores. Over the years, a handful of employees and 400 square metres of production space has grown into a 25-strong team that brings customer wishes

powerful lamination adhesives for high-end printing foil lamination is taken over by a new product. Jowacoll ® 764.45, the new Jowat foil lamination adhesive for print [...] printing foil lamination adhesives depends on the product requirements, the type of laminator and methods of application used. Jowat application consultants

has shown best results in tests and has therefore been labelled A+. The new foil adhesive is a vinyl acetate copolymer dispersion developed specifically for [...] downside of this type of adhesive due to the high content of plasticiser has become evident. In general, the plasticiser for the formulation of that type of adhesive [...] also excels in a number of other characteristics: Free of plasticiser and solvents Jowacoll ® ER 147.00 is free of plasticiser and solvents. From a health perspective

be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is [...] Primary microplastics type B are formed during use (e.g. tire abrasion or fibres released during the washing of synthetic clothing). Type A microplastics are e [...] millimetres in length. The release of type A microplastics can be intended, deliberately produced, or caused by accident. A major focus of the EU’s plastics strategy

developing a technology that will sustainably replace the previous process. In addition to a new type of plastic base beam, the focus here is on a new adhesive [...] usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] e, it would be advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and