Suche

of plastics, each with different surface properties, and often difficult to bond. The joint has to be virtually “invisible”, without any blisters that would [...] from the Jowatherm-Reaktant ® product group. These adhesives ensure a strong bond on all standard plastics (PET, PP and PVC). In addition, the PUR hot melts are

Jowat-Toptherm ® hot melt adhesives, which provide a reliable bond even on difficult to bond materials such as polypropylene woven without a prior surface treatment

Product Description The requirements for a strong and durable bond in the manufacture of foam mattresses are constantly growing. For instance due to new materials [...] materials and mattress compositions which are difficult to bond with standard adhesive systems. Like in many other applications, reactive Polyurethane hot melt [...] on all established materials, especially on materials which are difficult to bond, such as latex, viscose or gel foam. The PUR hot melt adhesive facilitates superior

such as low manufacturing costs, short setting times (hardening), and high bond strengths. Jowat ® 950.20 is a UF resin for hot curing, especially for classic [...] For a more elastic glue line with improved adhesion (e.g. for difficult-to-bond veneers), the adhesive can be mixed with 10 – 20 % of PVAc dispersion (for instance [...] instance Jowacoll ® 113.10). Low in formaldehyde: Jowat ® 950.20 facilitates an E1 bond quality (according to DIN EN 717-2). Downloads Application Our product in use

Description Modern thermoplastic hot melt adhesives based on polyolefin from Jowat bond wood-based materials as well as a wide variety of different plastics with relatively [...] only requires a good adhesion of the adhesive to the substrates. A reliable bond also has to ensure resistance against the vibrations occurring when the concrete [...] to be bonded has to be clean, dry and free of oil. To achieve a sufficient bond strength, the part with the adhesive only has to be pressed firmly onto the

cans with surfaces which are difficult to bond. Very short lap time, good adhesion to surfaces difficult to bond. de en fr Jowacoll ® 747.91 2200 For bonding [...] dispersion adhesives for this application facilitate a reliable and permanent bond – even at high feed speeds. Informazioni sul prodotto ☟ Choose a product group

such as low manufacturing costs, short setting times (hardening), and high bond strengths. Jowat ® 950.50 is a UF resin for hot and cold curing, especially [...] For a more elastic glue line with improved adhesion (e.g. for difficult-to-bond veneers), the adhesive can be mixed with 10 – 20 % of PVAc dispersion (for instance

t is only necessary for PP-based parts. Jowatherm-Reaktant ® 642.00/08 can bond TPO as well as PVC foils.* All these qualities coupled with particularly favourable [...] for high-tension edgefolding applications. After complete reaction, very high bond strength, outstanding resistance to heat and very good resistance to low te

processing unit, the application amount and the feed speed. Side glues are used to bond the end sheets of a book or a magazine to the cover and the demands on these [...] by nozzle or roller on the first and on the last page of the book block, to bond it to the cover. The adhesive for this application has to be flexible, adhere

full-surface bonding, and to classic veneering – PVAc glues provide a reliable bond on many different wood species and wood-based substrates. Jowacoll ® 104.20