Suche

allow the construction of furniture which can – via the interface adhesive – be used as source of heat for a more comfortable environment. Primer – from an adhesion [...] new lacquer and print technologies; when reactive polyurethane adhesives are used it functions as an accelerator for the crosslinking reaction. Adhesives – from [...] function and design Adhesives, developed to remain as invisible as possible, are used more and more as visible element for design and function: in parquet cosmetics

particularly formaldehyde. Consequently, many conversations focused on reactive PUR prepolymers. Not only was the basic absence of formaldehyde discussed, but [...] Because of formaldehyde, manufacturers of moulded plywood, finished floors, furniture elements and joinery are considering to switch from urea formaldehyde resin [...] (that are still used to some extent nowadays) to the new and powerful dispersion adhesives. Additionally to the required reduction of formaldehyde, further functions

VOC emission (TVOC) plus limits for 10 individual substances, of which formaldehyde is one. Industry and research also have joined the effort and developed [...] (TVOC). Especially the results regarding plasticiser-free products and formaldehyde emissions are remarkable. The new foil adhesive of the Jowacoll ® ER (e [...] dramatically reduced emissions. High initial strength Laminating materials used for the manufacture of floorings and doors have to be relatively strong to provide

portfolio. E mission r educed (ER) adhesives with very low emissions of formaldehyde, plasticizers and other ingredients support manufacturers in the production [...] Consistency and standardisation. These objectives of the modular production system used by numerous manufacturers in the automotive industry are linked to the entire [...] laminated with a press or by vacuum deep-drawing – the same adhesive should be used in all processes and fulfil the different requirements. When processes for the

polycondensation resins, urea formaldehyde resin glues (UF resins) are the most significant group of products. They are widely used in the general production of [...] CPL (Continuous Pressure Laminates). Due to an integrated hardener, the formaldehyde glue is prepared by simply mixing the powder with water (mixing ratio by [...] with 10 – 20 % of PVAc dispersion (for instance Jowacoll ® 113.10). Low in formaldehyde: Jowat ® 950.20 facilitates an E1 bond quality (according to DIN EN 717-2)

polycondensation resins, urea formaldehyde resin glues (UF resins) are the most significant group of products. They are widely used in the general production of [...] CPL (Continuous Pressure Laminates). Due to an integrated hardener, the formaldehyde glue is prepared by simply mixing the powder with water (mixing ratio by

and timber which is used for instance for the manufacture of wooden windowframes and garden furniture. Free of solvents and formaldehyde. Good adhesion to many [...] foam, PUR foams, metals and many other substrates. Free of solvents and formaldehyde. Good adhesion to many substrates. de en fr Jowapur ® 685.12 1-Component [...] materials and polystyrene foam, and many other substrates. Free of solvents and formaldehyde. Good adhesion to many substrates. de en fr Jowapur ® 685.32 1-Component

glulam production. Adhesives from the Jowapur ® 681.xx series are free of formaldehyde and solvents, and are also emission-free and odourless after complete curing [...] moisture and/or ambient humidity to create a water-insoluble resin, and is used for manufacturing load-bearing timber. Technical Data - Characteristics Max

composition, characteristics and processing parameters. The adhesives can be used for fingerjointing as well as for glulam, offer the choice of assembly times [...] prepolymer adhesives that impress due to formulations that are free of formaldehyde and VOC, and which facilitate lower application amounts compared to alternative

manufacture, carrier boards are coated with the most different surfaces. Frequently used materials apart from decor papers and veneers are thermoplastic foils, CPL, [...] applications by mixing a crosslinker into the adhesive. Adhesives based on urea formaldehyde (UF) resins were the state of the art for many years. Lately, they have