Suche

jowat.de http://www.jowat.de/andersdenken Bilder und Bildunterschriften: Bild 1 & 2: Jowat-Klebstoffe mit Kamera-Detektierbarkeit der Klebstoffraupe für höchste

choice of assembly times between 10 and 60 minutes, and for the first time facilitate an assembly-pressing time ratio of 1:1. Industrial users can therefore [...] does it make sense from an economic and ecological point of view – wood stores CO2 and helps fight against climate change. Glulam also allows for virtually limitless

pneumatics, hydraulics), and coating (steel or rubber) of the calender. Excursus 1: Parquet manufacturing The manufacture of two layer parquet is a good example [...] s short production cycles and significantly increases productivity. Excursus 2: Compound / Sandwich elements Due to the broad spectrum of processed materials

numbered B04 in hall 4, in Utrecht A113 in hall 1, and in Hannover C71 in hall 13. Photos and captions: Photo 1: Primary packaging: Full-surface interior lamination [...] Detmold, March 2, 2016 – The participation of Jowat at the Empack 2016 in Zurich (Switzerland), Utrecht (the Netherlands) and Hannover (Germany) focuses on [...] window as well as a barrier function for primary packaging. Source: Jowat SE Photo 2: Polypropylene woven: Thermoplastic hot melt adhesives from Jowat are the perfect

fibre paper. Jowat at FachPack in hall 2 / 2-320 www.jowat.de/en/ www.jowat.de/thinkdifferently Photos and captions: Photo 1 Packaging with display and removal [...] packaging with 180 ° flap bonding requires high strength. Source: Jowat SE Photo 2 Industrial adhesives for window lamination with foil. Source: Frip UK Photo 3:

Consultants for further information. The following Photos are available: Photo 1 & 2: “Zero-bondline” and the high resistance of PUR bonding – Jowatherm-Reaktant

The new 1-component PUR prepolymer adhesives were certified in June 2014 and have already been introduced at the first customers, with excellent feedback. All

thus future-proof adhesive can be evaluated from various points of view (Figure 1): What is the raw material basis of the adhesive's formulation? What impact does [...] from pulp production residues. However, directly obtained tree resins (Figure 2) or terpene resins (Figure 3), which various citrus fruits, are also an option [...] adhesives have a very low content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24,

-Dispersionen die richtige Wahl. Sie finden Jowat auf der HOLZ 2016 in Halle 1.1 Stand C14. www.jowat.ch [...] vergleichbar mit der Klassifizierung D4 bei Dispersionsklebstoffen ist. Jowat ® 2K SE-Polymer – der Montageklebstoff Dieses zweikomponentige Klebstoffsystem eignet [...] Untergründen für unterschiedlichste Einsatz-möglichkeiten in der Montage. Das 2K SE-Polymer-Klebstoffsystem verbindet die hohe Festigkeit der Epoxidharz-Klebstoffe