Suche

For the sector surface lamination, PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for [...] Reaktant® 603.80, a clear PUR hot melt adhesive used above all in lamination applications with high-gloss foils. This PUR hot melt adhesive exhibits a wide

compound. Contrary to the normal and expected behaviour of thermoplastic hot melts, the new adhesive provides at the same time excellent wetting properties

compound strength, is achieved. In contrast to the conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive [...] Jowat-Toptherm® are free of formaldehyde and in comparison to dispersion adhesives hot melt formulations do not contain water. Any possible swelling of the wood-based

colourless, transparent, and crosslinking hot melt of the product group of Jowatherm-Reaktant® is used. This hot melt also offers a wide adhesion spectrum, [...] composed of breathable multiple-layer compound laminates. The polyurethane hot melts of the Jowatherm-Reaktant®PUR Tex product group are specifically developed [...] of the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced flammability, degree

aktant: New reactive hot melt developments for the manufacture of cleaning textiles, PVC tablecloths and sanding papers: Reactive hot melt adhesives are the [...] the top performers among the hot melts. They are used when manufacturing conditions or the processing environments for technical textiles are very challenging [...] polyolefin (PO) or polyurethane (PUR), whether thermoplastic or reactive: The new hot melt adhesives from Jowat AG have been developed especially for the production

food and also for beverage packs. For closing this broad variety of cartons, hot melts must exhibit a wide adhesion spectrum to provide a reliable wetting of the [...] The polyolefin-based hot melt adhesives of the Jowat-Toptherm® family permit reliable packaging processes even when feed speeds are high. Cartons made of corrugated [...] which may be inherent in the carton blanks. And this permanently: whether in hot filling (up to 70 °C) or deep freezing (as low as -20 °C) - the material compound

compound strength round off the multiple advantages of these new breathable PUR hot melts. The consistent introduction of innovative new raw materials led to adhesive [...] becoming more and more stringent. With the new moisture-curing polyurethane hot melt adhesives from the product series Jowatherm-Reaktant® PUR Tex introduced [...] clearly comes out ahead. Focusing on the factor washing resistance, the new PUR hot melt adhesives from Jowat also excel by reaching top marks. Good adhesion on

frequent the use of moisture-curing PUR hot melt adhesives. A new and patented manufacturing method now allows the PUR hot melts of the series Jowatherm-Reaktant®

adhesive systems. This applies especially for the new Jowatherm-Reaktant ® PUR hot melts: Their processing characteristics were tailored for the high quality demands [...] in flat lamination. This provides advantages to the reactive Polyurethane hot melts of this group: a wide spectrum of adhesion on the most diverse substrates [...] reliability. The new Jowatherm-Reaktant ® flat bonding adhesives are powerful PUR hot melts with convincing additional aspects like high heat resistance and good processing

2015 Key topic at the main Jowat booth: Reactive PUR hot melts for edgebanding. Reactive PUR hot melts, the high performers among adhesives, were the main subject [...] at the Ligna 2015 was in hall 26. Conversations here focused mainly on PUR hot melts for edgebanding. These adhesives with increased initial strength facilitate [...] Thermoplastic adhesives replace water-based systems. Thermoplastic, PO-based hot melts were the centre of attention at the Interzum. Water-based adhesive systems