Suche

classic solvent-based adhesives and dispersions - become obsolete with PUR hot melts. The time needed to cool the adhesive down has been reduced to the level [...] The all-round new PUR hot melt is suitable for all 3D laminating applications in the automotive industry and provides superior quality, which previously required [...] characterised by significantly optimised product and processing properties. The hot melt adhesive provides a considerably faster build-up of cohesion and an improved

food and also for beverage packs. For closing this broad variety of cartons, hot melts must exhibit a wide adhesion spectrum to provide a reliable wetting of the [...] The polyolefin-based hot melt adhesives of the Jowat-Toptherm® family permit reliable packaging processes even when feed speeds are high. Cartons made of corrugated [...] which may be inherent in the carton blanks. And this permanently: whether in hot filling (up to 70 °C) or deep freezing (as low as -20 °C) - the material compound

processes, we are able to meet the permanently increasing demand, especially for hot melts, primers and solvent-based adhesives and to provide our customers with the [...] distance of about 40 km to Leipzig. The adhesive program includs dispersion, hot melt, and solvent-based adhesives as well as primer/adhesion promoters. This

Jowat’s technological competence and innovative capacity. With their PUR hot melts, the adhesive specialist from Detmold promises potential for significant [...] GROW series mark an important milestone in the development of bio-based hot melts for the environmentally friendly bonding of packaging, thereby highlighting [...] d as well as new product highlights from all fields of application. The PUR hot melt adhesives belonging to the continually growing Jowatherm-Reaktant® MR product

compound strength, is achieved. In contrast to the conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive [...] Jowat-Toptherm® are free of formaldehyde and in comparison to dispersion adhesives hot melt formulations do not contain water. Any possible swelling of the wood-based

Edgebanding Further Products Further products in the field of „Jowatherm ® EVA Hot Melt Adhesive”

dönüşüm) Ürün serisi ve özellikler Jowatherm ® CoPA hot melt yapıştırıcı İçeriği: Kopoliamitler Özellikler: PO hot melt yapıştırıcılara göre daha yüksek ısı dirençli [...] lastikleştiricilere karşı daha yüksek direnç. Ambalaj: Granül Jowatherm ® EVA hot melt yapıştırıcı İçeriği: Etilen ve vinil asetat esaslı kopolimer Özellikler: [...] Açıklama Hot melt yapıştırıcılar, ısıtıldığında sıvı hale gelen solvent içermeyen formülasyonlar olup eriyik halde uygulanır. İyi bir ıslanma gücü elde etmek

technology and the so-called “zero bondline” were introduced. Moisture-curing PUR hot melts are processed whenever high resistance to heat, water, steam, solvents or [...] Product Description Low-temperature Hot Melt Adhesives: Part of Jowat Green Adhesives Sustainability is diverse. This is not just about the use of renewable [...] business – more sustainable and responsible. Jowat has developed a new unfilled PUR hot melt adhesive for highest requirements in edgebanding. Formulated with modern

strength and high yield. An unfilled edgebanding adhesive based on a classic EVA (ethylene vinyl acetate) formulation, Jowatherm® 280.30 facilitates virtually

of monomer-reduced and therefore non-hazardous reactive polyurethane (PUR) hot melts for the wood and furniture industry from the Jowatherm-Reaktant® MR series [...] which facilitates colourless and virtually invisible bondlines. Reactive PUR hot melts were also in the spotlight at Interzum, with focus on the significant process [...] capacity and competence in PUR technology. This full range of monomer-reduced hot melt adhesives also shows that for Jowat the standard in PUR technology will