Suche

"block" sonuçlarına yönelik aramamız returned 9 results.

  1. Jowat-Toptherm® 238.20

    The product is block-free and is used for precoating decors as reel material. Product Features Storage-stable precoating of decors, block-free Tested for the [...] interiors. One of the greatest benefits provided by thermoplastic hot melts is the block-free, storage stable precoating of reel material. Therefore, the manufacturing
    /tr-TR/adhesives/hot-melt-adhesives/jowat-toptherm-23820/

  2. Jowat-Toptherm® 238.80

    interiors. One reason for the growing demand for this type of adhesive is the block-free, storage-stable precoating of reel material. Therefore, the manufacturing
    /tr-TR/adhesives/hot-melt-adhesives/jowat-toptherm-23880/

  3. Jowacoll® 104.20

    a general-purpose PVAc glue for Wood bonding, also for hardwood species and block bonding. Meets the requirements for durability class D2 according to EN 204
    /tr-TR/adhesives/dispersion-adhesives/jowacoll-10420/

  4. Diisocyanates - Things to consider in future

    at the cutting edge of permanent and superior bonding. An important building block of those reactive hot melt adhesives is monomeric diisocyanate. The processing
    https://www.jowat.com/tr-TR/haber-odas-detay/diisocyanates-things-to-consider-in-future/

  5. 3D fronts manufacturing – A challenging classic

    blocks There are many aspects in manufacturing that can become a stumbling block. For instance, the right storage and preparation of the substrates, the correct
    https://www.jowat.com/tr-TR/haber-odas-detay/3d-fronts-manufacturing-a-challenging-classic/

  6. Jowat-Toptherm® 233.10

    precast concrete. Directions for Use The PO adhesives are usually supplied in block, granulate or pillow form and are heated in standard melting units to a temperature
    /tr-TR/adhesives/hot-melt-adhesives/jowat-toptherm-23310/

  7. Jowatherm-Reaktant® 613.18

    drying or pre-drying periods must be observed. The adhesive is immediately block-free after application and ready to use for subsequent processing steps. A
    /tr-TR/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-61318/

  8. Small Beings, Big Plans

    manufacture of PHB-based adhesives that is currently providing a stumbling block to further progress. “The PHB needs to be used to make polyester urethane (PEU)
    https://www.jowat.com/tr-TR/haber-odas-detay/small-beings-big-plans/

  9. Hazard-Free Bonding

    Isocyanate is a main building block of polyurethane and a key ingredient in reactive PUR hot melt adhesives. While some of the isocyanate is bound into polymers
    https://www.jowat.com/tr-TR/haber-odas-detay/hazard-free-bonding/

Sıralama Türü