Suche

temperatures and join different materials with high initial strength. The processing characteristics are adapted to the high speeds in filling. Heat sealing adhesives [...] stacked after the adhesive has been applied. The product is characterised by a high hot tack (fast tack), a wide range of adhesion to many different materials, [...] filling good, the packaging material, the size of the packaging unit, and the point of sale or of use. For every bag type, there is a sealing system. Adhesives

varnish coatings. The appearance of products at the point of sale is enhanced with cut out windows. Highly transparent, special Jowacoll ® laminating adhesives

with superior processing characteristics and high initial strength. Jowat Toptherm ® products provide the high heat resistance required for the sealing of cardboard [...] needed for hot filling. Adhesives with a high heat resistance are also essential for packaging that is exposed to high temperatures during transport. In addition [...] . de en fr Jowat-Toptherm ® 256.65 1500 / 160 very short Very high heat resistance. Very high initial strength. Wide range of adhesion. Extremely colourfast

However, due to the organic ingredients, such as oil and fats, it is difficult to bond. Therefore, an adhesive was needed to facilitate a high compound strength [...] by a high solids content which ensures a fast setting even on wood with reduced moisture absorption. The special properties of the bondline, such as high moisture [...] form parts is a special strength of this high-performance adhesive: The hard glue film keeps substrates with a high internal stress in form – a major prerequisite

twice as high as SKAIO. Nevertheless, it still isn’t enough to challenge the undisputed leader of them all. The highest ‘plyscraper’ to date, as wooden high-rises [...] since the wooden blocks are only lying loosely on top of each other by this point! But of course the situation is different when it comes to real timber construction [...] without saying that apartments and offices in these wood-based buildings are in high demand. “It is clear from the growth rates of the global cross-laminated timber

advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and high-maintenance robots

The same packaging technology has already been in use at Jowat’s site in High Point (USA) for several years already. A continuous tubular PE foil is shaped by

forthcoming statutory training requirement under REACH. At the same time, the high initial strength and short setting times of the modern adhesives facilitate [...] clean and efficient manufacturing processes. From the technical point of view, the change is very easy. All that is needed is a few adaptions to the settings

adhesives with a wide range of adhesion facilitate high bond strengths with minimal consumption. Coupled with high thermal stability, it delivers a very clean process [...] , VerpackG) also refers to that assessment (cf. ZSVR, 2019). It has to be pointed out that those findings are based on the INGEDE-12 method that is not adapted [...] latest requirements on the market. Nevertheless, intense research activities point to a dynamic development of alternative raw materials in the next years. T

the wood and furniture industry were gradually replaced with lacquers with a high water content in the 1980s. Adhesives systems with significantly increased solids [...] short process cycles in assembly operations in spite of the higher boiling point of water-based lacquers. Since the turn of the millennium and the beginning [...] furniture industry has increased dramatically. “Apart from surfaces coated with highly resistant UV or acid-catalysed lacquers, our adhesives now also have to reliably