Suche

temperatures and join different materials with high initial strength. The processing characteristics are adapted to the high speeds in filling. Heat sealing adhesives [...] stacked after the adhesive has been applied. The product is characterised by a high hot tack (fast tack), a wide range of adhesion to many different materials, [...] filling good, the packaging material, the size of the packaging unit, and the point of sale or of use. For every bag type, there is a sealing system. Adhesives

pursuant to Article 6(1) point (a) of the GDPR or Article 9(2) point (a) of the GDPR or on a contract pursuant to Article 6(1) point (b) of the GDPR and the [...] processing would be based on Article 6(1) point (d) of the GDPR. Finally, processing operations may be based on Article 6(1) point (f) of the GDPR. Processing operations [...] express consent pursuant to Article 6(1) point (a) of the GDPR; the transfer is permitted in accordance with Article 6(1) point (f) of the GDPR to safeguard our legitimate

twice as high as SKAIO. Nevertheless, it still isn’t enough to challenge the undisputed leader of them all. The highest ‘plyscraper’ to date, as wooden high-rises [...] since the wooden blocks are only lying loosely on top of each other by this point! But of course the situation is different when it comes to real timber construction [...] without saying that apartments and offices in these wood-based buildings are in high demand. “It is clear from the growth rates of the global cross-laminated timber

advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and high-maintenance robots

The same packaging technology has already been in use at Jowat’s site in High Point (USA) for several years already. A continuous tubular PE foil is shaped by

forthcoming statutory training requirement under REACH. At the same time, the high initial strength and short setting times of the modern adhesives facilitate [...] clean and efficient manufacturing processes. From the technical point of view, the change is very easy. All that is needed is a few adaptions to the settings

adhesives with a wide range of adhesion facilitate high bond strengths with minimal consumption. Coupled with high thermal stability, it delivers a very clean process [...] latest requirements on the market. Nevertheless, intense research activities point to a dynamic development of alternative raw materials in the next years. T [...] that can contain 30 to 50 % resins from renewable materials and still have a high thermal stability. One of those clean products is Jowatherm® GROW 853.20 developed

the wood and furniture industry were gradually replaced with lacquers with a high water content in the 1980s. Adhesives systems with significantly increased solids [...] short process cycles in assembly operations in spite of the higher boiling point of water-based lacquers. Since the turn of the millennium and the beginning

For the first time, the location in High Point was also certified in accordance with ISO 14001. Achim Becker says: “For Jowat, sustainability means making sure

locations audited in Detmold (ISO 9001, 14001, 50001), Elsteraue (ISO 50001), High Point (ISO 9001) and Bandar Enstek (ISO 9001). All certifications were extended [...] because they all play an important part in putting our systems into practice at a high standard.” The change to DEKRA as certifier is also viewed as very positive