Background noise has a substantial effect on the quality of a car and the driving experience for passengers. Passenger cells in modern vehicles have to provide a silent environment and therefore need to be perfectly insulated from unwanted engine and road noise.
Self-adhesive insulating materials, like acoustic heavy-duty foils or vibration absorbing panels, are used to reduce the noise seeping into the cabin. These materials are bonded directly on the painted metal in concealed places behind the door paneling, on the body floor or in the trunk. Copolymer dispersions are odorless and characterized by good heat resistance as well as low VOC values and are the adhesives of choice in this application. Alternatively, the sound deadening materials may also be bonded with special PSA hot melts with minimal odour. Due to their vibration absorbing properties, these adhesives support the effectiveness of the insulating materials.
In addition, Jowat supplies suitable adhesives for bonding the clips and retainers necessary to attach sound insulation panels in the wheel housing to absorb splashing water and road noise or under the hood for sound insulation. Powerful PUR hot melts are highly resistant to all weathering conditions and are ideal for these application.
|Base|| Viscosity [mPas] /|
data sheet (PDF)
|Jowatherm® 244.80||Pressure-Sensitive Adhesive||23500 / 180||170 - 190||For giving self-adhesive properties to a variety of substrates.|
|Jowatherm® 244.85||Pressure-Sensitive Adhesive||26000 / 180||170 - 190||For giving self-adhesive properties to a variety of substrates.|
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are necessary. For the specifications as well as further information, please refer to the latest technical data sheets.