Suche

particularly formaldehyde. Consequently, many conversations focused on reactive PUR prepolymers. Not only was the basic absence of formaldehyde discussed, but [...] Because of formaldehyde, manufacturers of moulded plywood, finished floors, furniture elements and joinery are considering to switch from urea formaldehyde resin [...] (that are still used to some extent nowadays) to the new and powerful dispersion adhesives. Additionally to the required reduction of formaldehyde, further functions

polycondensation resins, urea formaldehyde resin glues (UF resins) are the most significant group of products. They are widely used in the general production of [...] CPL (Continuous Pressure Laminates). Due to an integrated hardener, the formaldehyde glue is prepared by simply mixing the powder with water (mixing ratio by [...] with 10 – 20 % of PVAc dispersion (for instance Jowacoll ® 113.10). Low in formaldehyde: Jowat ® 950.20 facilitates an E1 bond quality (according to DIN EN 717-2)

and timber which is used for instance for the manufacture of wooden windowframes and garden furniture. Free of solvents and formaldehyde. Good adhesion to many [...] foam, PUR foams, metals and many other substrates. Free of solvents and formaldehyde. Good adhesion to many substrates. de en fr Jowapur ® 685.12 1-Component [...] materials and polystyrene foam, and many other substrates. Free of solvents and formaldehyde. Good adhesion to many substrates. de en fr Jowapur ® 685.32 1-Component

materials and material combinations. Due to their benefits, these adhesives are used in many industries, in particular in load-bearing glulam applications, in the [...] necessary, easy processing - fast curing at room temperature - free of formaldehyde and solvents - emission-free and odourless after complete curing - good

polycondensation resins, urea formaldehyde resin glues (UF resins) are the most significant group of products. They are widely used in the general production of [...] CPL (Continuous Pressure Laminates). Due to an integrated hardener, the formaldehyde glue is prepared by simply mixing the powder with water (mixing ratio by

portfolio. E mission r educed (ER) adhesives with very low emissions of formaldehyde, plasticizers and other ingredients support manufacturers in the production [...] Consistency and standardisation. These objectives of the modular production system used by numerous manufacturers in the automotive industry are linked to the entire [...] laminated with a press or by vacuum deep-drawing – the same adhesive should be used in all processes and fulfil the different requirements. When processes for the

adhesive with hazard-free labeling for general edgebanding purposes. It can be used for the bonding of established edgebands with through-feed edgebanders and is [...] of the “Green Adhesives” series can impress with very low emissions of formaldehyde, plasticizers and other ingredients and support the manufacture of products [...] emissions. The two dispersion adhesives meet durability class D3 and can be used for the bonding of hard and soft wood species as well as for the flat lamination

portfolio. E mission r educed (ER) adhesives with very low emissions of formaldehyde, plasticizers and other ingredients support manufacturers in the production [...] D3 in accordance with EN 204/205. This means that Jowacoll ® 103.10 can be used for interior applications with frequent shortterm exposure to running or condensed

composition, characteristics and processing parameters. The adhesives can be used for fingerjointing as well as for glulam, offer the choice of assembly times [...] prepolymer adhesives that impress due to formulations that are free of formaldehyde and VOC, and which facilitate lower application amounts compared to alternative

allow the construction of furniture which can – via the interface adhesive – be used as source of heat for a more comfortable environment. Primer – from an adhesion [...] new lacquer and print technologies; when reactive polyurethane adhesives are used it functions as an accelerator for the crosslinking reaction. Adhesives – from [...] function and design Adhesives, developed to remain as invisible as possible, are used more and more as visible element for design and function: in parquet cosmetics