Suche

ße 10 – 14, 32758 Detmold, Germany, can be contacted by phone at: +49 (0) 5231 749-0, e-mail: info @ jowat . de . B. Data Protection Officer: Jannik Wallbaum [...] the legal duties of the data controller arising from section 6(2) of DGUV provision 1, section 8(2) of the German Act on Occupational Health and Safety (Arbei [...] information duties: Retention period of personal data: The data will be erased 2 years after the date on which it was first collected. Rights of the data subject:

diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with a free monomer isocyanate content of 0.1 % or higher must be labelled with [...] information (H and P statements). Adhesives with an MDI content of less than 0.1 % are not subject to hazard labelling requirements. Jowat has successfully

nell’ordine di ca. 2% Dal 2012, i prodotti contenenti isocianato con un contenuto di monomero libero di isocianato pari o superiore allo 0,1% devono essere [...] Gli adesivi con un contenuto di monomero libero di isocianato inferiore allo 0,1% non sono soggetti a restrizioni di etichettatura per quanto riguarda le sostanze [...] con successo su tecnologie alternative che sono al di sotto del limite dello 0,1% dall’inizio del 21° secolo. Il gruppo di prodotti Jowatherm-Reaktant ® MR

ato, MDI) nell’ordine di ca. 2% Dal 2012, i prodotti con un contenuto di isocianato monomerico libero pari o superiore allo 0,1% devono essere etichettati con [...] Gli adesivi con un contenuto di isocianato monomerico libero inferiore allo 0,1% non sono soggetti ai requisiti di etichettatura di pericolo. Downloads Ap

according to the standard have to be resistant against solvents (DIN ISO 2836, 6.2.2, 6.2.3) and alkali (DIN ISO 2836; 5.3). If special inks or Pantone inks are used [...] Depending on the type of dispersion, the size of the plastic particles can vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. [...] applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical

Carefully remove as much as possible of the PUR hot melt remnants from the walls. 2. Fill the suitable Jowat ® flushing agent (depending on the adhesive type) into [...] fr Jowat ® 930.74 Flushing Agent red, granulate / blocks 20000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor [...] Jowat ® 930.84 Flushing Agent red, granulate 25000 / 100 approx. 100, max. 150 0,93 / 20 80 Flushing of melting units and hoses. Contains a rection inhibitor

adhesive remnants should be collected in a coated drip pan or a similar container. 2. In addition, hot melt adhesive may be cleaned off the application roller using [...] technical data sheet (PDF) Jowat ® 930.34 red, granulate 9000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor [...] viscosity. de en fr Jowat ® 930.74 red, granulate / blocks 20000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor

MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate content of 0.1 % or more need to be labelled [...] (H and P statements). Adhesives with a free monomer isocyanate content below 0.1 % are not subject to labelling restrictions with regard to hazardous substances [...] working successfully on alternative technologies which are below the limit of 0.1 % since the beginning of the 21st century. The Jowatherm-Reaktant ® MR (mo

diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with an MDI (CAS No. 101-68-8) content of 0.1 % or higher must be labelled with [...] superior bonding characteristics. Adhesives with an MDI content of less than 0.1 % are not subject to labelling requirements. Since the early 2000s, Jowat has

diisocyanate – in short MDI) of approx. 2 %. Since 2002, products containing isocyanate with an MDI (CAS No. 101-68-8) content of 0.1 % or higher must be labelled with [...] superior bonding characteristics. Adhesives with an MDI content of less than 0.1 % are not subject to labelling requirements. Since the early 2000s, Jowat has