Suche

Jowatherm ® 288.60 is an edgebanding adhesive that has been developed with special focus on a wide range of applications. In addition to bonding established edge substrates, Jowatherm ® 288.60 impress

to short-term exposure to water or higher humidity. The Jowatherm® 280.50 EVA hot melt adhesive is used for highquality edgebanding, which is particularly

frequent the use of moisture-curing PUR hot melt adhesives. A new and patented manufacturing method now allows the PUR hot melts of the series Jowatherm-Reaktant®

compound strength, is achieved. In contrast to the conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive [...] Jowat-Toptherm® are free of formaldehyde and in comparison to dispersion adhesives hot melt formulations do not contain water. Any possible swelling of the wood-based

the tried and proven adhesive systems from Jowat consisting of powerful PUR hot melts and primers have met the high demands in window profile wrapping. Outstanding [...] higher initial strength due to a considerably shorter open time of the new PUR hot melt ensures reliable processes and a high quality of the end product – even

and delivers a performance that is comparable to if not better than PUR hot melts that are subject to hazardous material labelling. The new adhesive is ch [...] developed alternative technologies for the production of non-hazardous PUR hot melts since the early 2000s. The Jowatherm-Reaktant® MR series with its monomer-reduced [...] For many years, the one-component, moisture-curing polyurethane (PUR) hot melt adhesives of the Jowatherm-Reaktant® product line have proven their worth and

The professional article is published in the Magazine VETAS N° 404 March 2016. www.vetas.com

water-based adhesives are further benefits provided by the PUR hot melts. Usually, reactive hot melts are applied on one substrate only. In demanding applications [...] challenge. Coupled with the chemical crosslinking of the adhesive, reactive hot melts provide excellent adhesion to even difficult to bond materials such as latex [...] and are characterised by very good penetration into porous substrates. PUR hot melts are suitable for all materials used in the production of mattresses and have

The article is published in the magazine 'VR 01/18' in German language. You can download the original article down below.

Jowat—the Jowacoll® 110.00 assembly adhesive, an adapted Jowatherm® 288.xx series EVA hot melt adhesive for edgebanding, and a plastics adhesive for small repairs. [...] When put to the test on a double-sided IMA edge laminating machine, the PO hot melt adhesive outshone the product Nolte had previously been using. The changeover [...] Jowat adhesives for the automated bonding of handle strips—the colorless PUR hot melt adhesive Jowatherm-Reaktant® 608.00 and the Jowacoll® 114.80 adhesive,