Suche

successful milestones of this cooperation is the transition from EVA hot melt adhesives to unfilled PO hot melt adhesives in profile wrapping applications. Jowat-Toptherm [...] provided the right product for HLF. The profile manufacturer also relies on hot melt adhesives from Jowat SE in other applications, for example in packaging [...] equipment. Probably the most significant advantage of the current, unfilled PO hot melt adhesive is how smoothly and evenly it can be applied. The uniformly bonded

dispersion adhesives based on polyvinyl acetate (PVAc), different hot melt adhesives (PUR and EVA), and glues based on emulsion polymer isocyanate (EPI) are also [...] frame wrapping with MICROLAN, since adhesives based on ethylene-vinyl acetate (EVA) and polyolefin (PO) were not suitable for this material,” explains Dr. Zdzisław [...] requirements for the bonding and coating of the material. PORTA had never used a PUR hot melt adhesive before, however, and did not yet have a suitable melting system

filter media and stabilize it using a hot melt adhesive.” Adhesives like Jowatherm 262.25 based on ethylene-vinyl acetate (EVA) are optimally adapted for the pleating [...] process, with the appropriate open time and high green strength. In addition, hot melt adhesives are solid when cold but remain flexible enough to facilitate

Jowat—the Jowacoll® 110.00 assembly adhesive, an adapted Jowatherm® 288.xx series EVA hot melt adhesive for edgebanding, and a plastics adhesive for small repairs. [...] When put to the test on a double-sided IMA edge laminating machine, the PO hot melt adhesive outshone the product Nolte had previously been using. The changeover [...] Jowat adhesives for the automated bonding of handle strips—the colorless PUR hot melt adhesive Jowatherm-Reaktant® 608.00 and the Jowacoll® 114.80 adhesive,

tried-and-true “all-rounder” for the manufacture of HEPA and ULPA filters. This EVA hot melt adhesive supports high-speed manufacturing processes with processing [...] green strength facilitating immediate handling. Jowat also supplies modern PUR hot melt adhesives for activated carbon binding and for the lamination of multilayer [...] facilitates resource-efficient bonding processes. The key benefit of this PUR hot melt adhesive: A very low monomer diisocyanate (MDI) content of less than 0

common type of adhesive used for bonding construction textiles is strong PO hot melts. While the adhesive is applied over a large area when using a laminate, coating [...] wide range of optimization options when it comes to coating roof linings. PUR hot melt adhesives are the perfect choice for moistureresistant bonds that also [...] candidate for effective use in the field of construction textiles is the PUR hot melt adhesive Jowatherm-Reaktant® 630.20. Due to its low-viscosity formulation

pull-ring cans provides a very interesting and high-quality addition to EVA hot melts, especially in non-industrial processes. The benefits are indisputable: [...] Jowatherm-Reaktant ® MR 608.90, two monomer-reduced and therefore hazard-free PUR hot melts of the Jowat Green Adhesives series. Their use provides higher occupational [...] Demand for the PUR hot melt granulate is particularly strong among small- and medium-sized handicraft businesses. The adhesive granulate supplied in small pull-ring

Jowatherm ® 288.60 is an edgebanding adhesive that has been developed with special focus on a wide range of applications. In addition to bonding established edge substrates, Jowatherm ® 288.60 impress

vinyl acetate (EVA) are optimally adapted to the pleating process with a suitable open time as well as high initial strength. In addition, the hot melt adhesives [...] Dressler explains: “The filter medium is pleated for this purpose and fixed with a hot melt adhesive. This maximises the filter area within the available space.” Adhesives

to short-term exposure to water or higher humidity. The Jowatherm® 280.50 EVA hot melt adhesive is used for highquality edgebanding, which is particularly