Suche

March 2018 you can visit Jowat at the HOLZ HANDWERK show in Nuremberg, hall 11.0, booth 306. For further information about the trade fair motto Service unites

the hazard labeling requirement if the monomeric MDI concentration is less than 0.1 percent. Sustainable adhesive solutions Monomer-reduced—and therefore haza

hot melt adhesive: A very low monomer diisocyanate (MDI) content of less than 0.1 percent and therefore hazard-free labeling. In addition to increased occupational

Jowat SE Ernst-Hilker-Straße 10 - 14 D-32758 Detmold Phone: +49 (0) 5231 749-0 E-Mail: info@jowat.de Sede sociale: Detmold Registro del commercio: Lemgo HRB

147.00 Foil Adhesive 10000 / RT 0 – 3 1,35 ± 0,05 / RT de en fr Jowacoll ® 148.00 Foil Adhesive 12000 ± 4000 / 20 0 – 3 1,35 ± 0,05 / RT de en fr Jowacoll ® 148 [...] 148.20 Foil Adhesive 23000 / 20 0 – 3 1,35 ± 0,05 / RT de en fr Jowacoll ® 148.70 Foil Adhesive 10000 / 20 0 - 4 1,25 ± 0,05 / RT de en fr PUR hot melt adhesive [...] - 130 1 ± 0,2 / 120 1,1 ± 0,1 / 23 de en fr Jowatherm-Reaktant ® 609.50 PUR Hot Melt Adhesive 25000 ± 5000 / 120 120 - 140 1 ,5 ± 0,5 / 120 1,1 ± 0,1 / 23 de

a D3 adhesive in accordance with EN 204/205 and meets a tensile strength > 7.0 N/mm² according to EN 14257 (WATT ‘91). Jowacoll ® 103.30 is characterised by

according to the standard have to be resistant against solvents (DIN ISO 2836, 6.2.2, 6.2.3) and alkali (DIN ISO 2836; 5.3). If special inks or Pantone inks are used [...] Depending on the type of dispersion, the size of the plastic particles can vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. [...] applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical

Download technical data sheet (PDF) Jowapur ® 681.xx Adhesive Type: EN 15425–I–70–GP–0.3–w from 10 to 60 minutes, depending on adhesive type from 10 to 60 minutes,

The ZOW 2013 is the platform to highlight the outstanding perfor-mances of the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product value

for the textile industry. Due to a free monomer isocyanate content of less than 0.1 percent, the hot melt adhesive is not subject to hazard labeling and does therefore