Suche

Szukaliśmy "require". Rezultatów: 20.

  1. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin quantities for achieving the required tack. These adhesive formulations [...] this sector. In combination with the new Primer Jowat® 406.82 that does not require hazard labelling, it permits not only a shorter time for the profiles in storage
    https://www.jowat.com/pl-PL/szczegoly-newsroomu/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  2. Epoxy Resin Jowat® 692.30

    1995-1-1/NA for Switzerland. Approvals and certifications for other countries require separate testing. Suited for interior as well as exterior applications. The
    /pl-PL/adhesives/reactive-systems/jowat-2-c-epoxy-resins/jowat-epoxy-resin-69230/

  3. Jowacoll® Dispersions for Flat Lamination

    become established in the flooring industry. Materials like PET, TPU, or vinyl require special adhesive systems to reach maximum adhesion. Jowacoll ® foil adhesives [...] choosing an adhesive. Porous and moisture-absorbing substrates like veneer require another adhesive compared to non-absorbent substrates with a low surface tension
    /pl-PL/adhesives/dispersion-adhesives/jowacoll-dispersions-for-flat-lamination/

  4. “Tuning for Print Products“ (2016)

    print sheet lamination. Highly demanding applications in the printing industry require innovative adhesive solutions. Jowat adhesives and varnishes are tailored
    /pl-PL/profile/campaigns/tuning-for-print-products-2016/

  5. Jowatherm-Reaktant® 638.20

    not expose the substrate to high heat. In addition, the adhesive does not require high temperatures for melting and application and thereby saves energy in
    /pl-PL/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-pur-hotmelt/jowatherm-reaktantr-63820/

  6. Jowatherm-Reaktant® 613.18

    represents a particular challenge. Commonly used waterbased PU dispersions require a sufficiently high pressure to achieve a good bond. The lamination of the
    /pl-PL/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-61318/

  7. Jowat Green Adhesives for Sustainable Textile Lamination

    hot melt adhesive is not subject to hazard labeling and does therefore not require compulsory training starting from 2023. On the performance side, the adhesive
    https://www.jowat.com/pl-PL/szczegoly-newsroomu/jowat-green-adhesives-for-sustainable-textile-lamination/

  8. “Service unites” – Jowat is presenting innovative adhesive technologies at interzum 2017

    optimum adhesion of adhesives on materials which are difficult to bond and require a surface treatment. These adhesion promoters are crucial for high bonding
    https://www.jowat.com/pl-PL/szczegoly-newsroomu/service-unites-jowat-is-presenting-innovative-adhesive-technologies-at-interzum-2017/

  9. Dispersions at work – versatile and trusted wood adhesives

    must be protected by an adequate surface coating. Moisture-resistant bonds require special reactive one- and two-component D4 dispersions. That latest generation [...] polymer isocyanate) adhesives have been tried and tested in applications that require durability class D4, in particular joints that are exposed to direct weathering
    https://www.jowat.com/pl-PL/szczegoly-newsroomu/dispersions-at-work-versatile-and-trusted-wood-adhesives/

  10. Jowat SE at drupa 2016: „Tuning for Print Products“ – Adhesive solutions for special requirements in the printing industry.

    Braille application. Highly demanding applications in the printing industry require innovative adhesive solutions. Jowat adhesives and varnishes are tailored
    https://www.jowat.com/pl-PL/szczegoly-newsroomu/jowat-se-at-drupa-2016-tuning-for-print-products-adhesive-solutions-for-special-requirements-in/

Sortuj wg.

Usuń wszystkie filtry