Suche

This powerful 1-component D4 dispersion is based on extensive experience with innovative raw materials used in the composition of the successful 2-component adhesives [...] also been verified. The new 1-component D4 dispersion for solid wood bonding benefited from the developmental experience with the 2-component Jowacoll® dispersion [...] advantages of efficient processing known from 1‑component products with the high strength previously achieved only with 2‑component products, partially due to the

folding – the processing characteristics of this 1-component adhesive are similar to, if not better than those of 2 component systems in the high-end sector. The [...] By using this 1 component adhesive, processors eliminate all error sources, like dosage, mixing, pot life or disposal, which are existing when 2 component systems [...] this high-end dispersion. The performance of this adhesive is comparable to the 2 component alternatives available, however, the superior processing properties

-Dispersionen die richtige Wahl. Sie finden Jowat auf der HOLZ 2016 in Halle 1.1 Stand C14. www.jowat.ch [...] vergleichbar mit der Klassifizierung D4 bei Dispersionsklebstoffen ist. Jowat ® 2K SE-Polymer – der Montageklebstoff Dieses zweikomponentige Klebstoffsystem eignet [...] Untergründen für unterschiedlichste Einsatz-möglichkeiten in der Montage. Das 2K SE-Polymer-Klebstoffsystem verbindet die hohe Festigkeit der Epoxidharz-Klebstoffe

verandalı küçük bir bar da bir diğer ilgi çekici buluşma noktası olacak. Ayrıca 1.200 m2’lik bir alandan oluşacak olan giriş katında kimyasal-fiziksel bir analitik [...] alanlarına ilişkin farklı modern endüstriyel ekipmanlara sahip biri 200 m2 diğeri 500 m2 büyüklüğünde iki makine odasına sahip olacak. Söz konusu ekipmanlar dâhili

numbered B04 in hall 4, in Utrecht A113 in hall 1, and in Hannover C71 in hall 13. Photos and captions: Photo 1: Primary packaging: Full-surface interior lamination [...] Detmold, March 2, 2016 – The participation of Jowat at the Empack 2016 in Zurich (Switzerland), Utrecht (the Netherlands) and Hannover (Germany) focuses on [...] window as well as a barrier function for primary packaging. Source: Jowat SE Photo 2: Polypropylene woven: Thermoplastic hot melt adhesives from Jowat are the perfect

will find Jowat at FachPack in Nuremberg from 28 to 30 September in Hall 2 Stand 2-328. *Compared to other Jowat products for this application. [...] as well. The Detmold-based adhesives expert is fielding Jowat-Toptherm ® 256.10 as a premium all-rounder in the Jowat portfolio for tray, carton and box bonding

the choice of assembly times between 10 and 60 minutes and facilitate an assembly time-pressing time ratio of up to 1:1. Jowat SE’s presence at the trade fair

the choice of assembly times between 10 and 60 minutes, and facilitate an assembly time-pressing time ratio of up to 1:1 that has never been achieved before

Jowat ® 2-comp. SE polymer – the adhesive for assembly works Due to the excellent adhesion to metal, plastic, wood, concrete and mineral substrates, this 2-component [...] Reaktant ® for moisture-resistant edgebanding, the assembly adhesive Jowat ® 2K SE-Polymer for the most diverse substrate combinations and Jowacoll ® Five Star [...] adhesive for water-resistant edgebanding, suitable for kitchens and bathrooms; a 2-component silane epoxy resin adhesive for joining the most different materials

the two flagship products Jowat-Toptherm ® 851.10 and 851.15 at this year’s Anuga FoodTec. Jowat-Toptherm ® 851.10 is the product of choice for bonding e.g. coated [...] packaging experts from March 19 to 22, 2024, at Anuga FoodTec in Cologne, hall 8.1, booth F033.