Suche

This powerful 1-component D4 dispersion is based on extensive experience with innovative raw materials used in the composition of the successful 2-component adhesives [...] also been verified. The new 1-component D4 dispersion for solid wood bonding benefited from the developmental experience with the 2-component Jowacoll® dispersion [...] advantages of efficient processing known from 1‑component products with the high strength previously achieved only with 2‑component products, partially due to the

folding – the processing characteristics of this 1-component adhesive are similar to, if not better than those of 2 component systems in the high-end sector. The [...] By using this 1 component adhesive, processors eliminate all error sources, like dosage, mixing, pot life or disposal, which are existing when 2 component systems [...] this high-end dispersion. The performance of this adhesive is comparable to the 2 component alternatives available, however, the superior processing properties

-Dispersionen die richtige Wahl. Sie finden Jowat auf der HOLZ 2016 in Halle 1.1 Stand C14. www.jowat.ch [...] vergleichbar mit der Klassifizierung D4 bei Dispersionsklebstoffen ist. Jowat ® 2K SE-Polymer – der Montageklebstoff Dieses zweikomponentige Klebstoffsystem eignet [...] Untergründen für unterschiedlichste Einsatz-möglichkeiten in der Montage. Das 2K SE-Polymer-Klebstoffsystem verbindet die hohe Festigkeit der Epoxidharz-Klebstoffe

numbered B04 in hall 4, in Utrecht A113 in hall 1, and in Hannover C71 in hall 13. Photos and captions: Photo 1: Primary packaging: Full-surface interior lamination [...] Detmold, March 2, 2016 – The participation of Jowat at the Empack 2016 in Zurich (Switzerland), Utrecht (the Netherlands) and Hannover (Germany) focuses on [...] window as well as a barrier function for primary packaging. Source: Jowat SE Photo 2: Polypropylene woven: Thermoplastic hot melt adhesives from Jowat are the perfect

will find Jowat at FachPack in Nuremberg from 28 to 30 September in Hall 2 Stand 2-328. *Compared to other Jowat products for this application. [...] as well. The Detmold-based adhesives expert is fielding Jowat-Toptherm ® 256.10 as a premium all-rounder in the Jowat portfolio for tray, carton and box bonding

the choice of assembly times between 10 and 60 minutes and facilitate an assembly time-pressing time ratio of up to 1:1. Jowat SE’s presence at the trade fair

the choice of assembly times between 10 and 60 minutes, and facilitate an assembly time-pressing time ratio of up to 1:1 that has never been achieved before

previously unachieved assembly-pressing time ratio of up to 1:1 and flexible assembly times between 10 and 60 minutes in particular sparked a lot of interest among [...] the adhesives experts from Detmold presented an expanded portfolio of certified 1-component PUR prepolymer adhesives, with different product versions for a wide

Jowat ® 2-comp. SE polymer – the adhesive for assembly works Due to the excellent adhesion to metal, plastic, wood, concrete and mineral substrates, this 2-component [...] Reaktant ® for moisture-resistant edgebanding, the assembly adhesive Jowat ® 2K SE-Polymer for the most diverse substrate combinations and Jowacoll ® Five Star [...] adhesive for water-resistant edgebanding, suitable for kitchens and bathrooms; a 2-component silane epoxy resin adhesive for joining the most different materials

the two flagship products Jowat-Toptherm ® 851.10 and 851.15 at this year’s Anuga FoodTec. Jowat-Toptherm ® 851.10 is the product of choice for bonding e.g. coated [...] packaging experts from March 19 to 22, 2024, at Anuga FoodTec in Cologne, hall 8.1, booth F033.