Uygulama Açıklaması
Hotmelt yapıştırıcılar ile Profil Sarma
Sarılan profiller, günümüzde modern mobilya ve bina içi imalatındaki standart bileşenler olarak kabul edilmektedir. Mobilya dekoru, süpürgelikler veya korniş rayları, çekmece çerçeveleri, duvar ve tavan panelleri, kapı çerçeveleri ve diğer tüm profillere bakılmaksızın en farklı temel yüzeyler üzerindeki profil sarma çeşitleri güncel bir konudur ve sarma malzemeleri çok çeşitli folyo, kağıt veya kaplama çeşidi arasından seçilebilir.
Temel profillere yönelik malzemeler, sert ahşaptan, ahşap temel üzeri yüzeylere ve plastiklere kadar büyük ölçüde değişiklik göstermekte olup, alüminyum ve metal profil sarma işlemleri her geçen gün daha yaygın bir nitelik kazanmaktadır.
Yapıştırıcı uygulama teknolojisi de sürekli olarak gelişmektedir. Günümüzde tercih edilen teknoloji, genişliği ayarlanabilir slot nozülleri yoluyla gerçekleştirilen uygulamalardır. Besleme hızları geçmiş yıllarda arttırılmış olup, bugün modern çizgiler 100 m/dk hızına kadar ulaşabilmektedir.
Ürün Bilgileri
- PO hot melt adhesive
- EVA hot melt adhesive
- PUR hot melt adhesive
PO hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Open Time [s] / Temperature [°C] / µm Film |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowat-Toptherm® 221.80 | PO Hot Melt Adhesive | 11550 ± 2050 / 200 | 180 - 200 | 115 ± 5 | 0,90 ± 0,02 / 20 | 15 ± 2 / 190 / 120 | de en fr |
Jowat-Toptherm® 236.50 | PO Hot Melt Adhesive | 8000 ± 2000 / 200 | 180 - 200 | 110 ± 5 | 0,87 ± 0,02 / 20 | 15 ± 2 / 190 / 120 | de en fr |
Jowat-Toptherm® 236.70 | PO Hot Melt Adhesive | 21000 ± 2500 / 200 | 180 - 200 | 115 ± 5 | 0,89 ± 0,02 / 20 | 12 ± 2 / 190 / 120 | de en fr |
Jowat-Toptherm® 221.00 | PO Hot Melt Adhesive | 23200 ± 2200 / 200 | 115 ± 5 | 0,90 ± 0,03 / 20 | de en fr | ||
Jowat-Toptherm® 224.00 | PO Hot Melt Adhesive | 4300 ± 900 / 200 | 170 - 190 | 95 ± 5 | 0,90 ± 0,02 / 20 | de en |
EVA hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Open Time [s] / Temperature [°C] / µm Film |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowatherm® 280.30/31 | EVA Hot Melt Adhesive | 50500 ± 12500 / 200 | 180 - 200 | 90 ± 5 | 1,03 ± 0,03 / 20 | 6 ± 2 / 190 / 200 | de en fr |
Jowatherm® 282.30 | EVA Hot Melt Adhesive | 12150 ± 3600 / 200 | 160 - 180 | 75 ± 5 | 1,31 ± 0,05 / 20 | 18 ± 3 / 160 / 200 | de en fr |
Jowatherm® 291.45 | EVA Hot Melt Adhesive | 5500 ± 1275 / 200 | 170 - 190 | 85 ± 5 | 1,04 ± 0,03 / 20 | 18 ± 2 / 180 / 120 | de en fr |
Jowatherm® 291.60 | EVA Hot Melt Adhesive | 5550 ± 1270 / 200 | 170 - 190 | 80 ± 5 | 1,00 ± 0,02 / 20 | 6 ± 2 / 180 / 120 | de en fr |
Jowatherm® 293.50 | EVA Hot Melt Adhesive | 5500 ± 2000 / 200 | 180 - 200 | 85 ± 5 | 1,17 ± 0,05 / 20 | 4 ± 2 / 190 / 120 | de en |
PUR hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Open Time [s] / Temperature [°C] / µm Film |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowatherm-Reaktant® 605.10 | PUR Hot Melt Adhesive | 41500 ± 13500 / 140 | 110 - 140 | 60 ± 5 | 1,1 ± 0,1 / 23 | 30 ± 5 / 140 | de en fr |
Jowatherm-Reaktant® 605.20 | PUR Hot Melt Adhesive | 35000 ± 6800 / 140 | 140 | 60 ± 10 | 1,1 ± 0,1 / 23 | 25 ± 10 / 140 | de en fr |
Jowatherm-Reaktant® 605.65 | PUR Hot Melt Adhesive | 37500 ± 7500 / 140 | 130 - 150 | 60 ± 5 | 1,1 ± 0,1 / 23 | 32 ± 5 / 140 | de en fr |
Jowatherm-Reaktant® 605.80 | PUR Hot Melt Adhesive | 23000 ± 5000 / 140 | 120 - 140 | 65 ± 5 | 1,1 ± 0,1 / 23 | 9 ± 3 / 140 | de en fr |
Jowatherm-Reaktant® 608.00/01 | PUR Hot Melt Adhesive | 90000 ± 20000 / 120; 42500 ± 7500 / 140 | 100 - 120 | 65 ± 5 | 1,1 ± 0,1 / 23 | 8 ± 2 / 140 | de en fr |
Jowatherm-Reaktant® MR 608.90 | Monomer-Reduced PUR Hot Melt Adhesive | 60000 ± 20000 / 140 | 120 - 140 | 70 ± 5 | 1,1 ± 0,1 | de en fr | |
Jowatherm-Reaktant® MR 605.90 | Monomer-Reduced PUR Hot Melt Adhesive | 22500 ± 7500 / 140 | 130 - 150 | 1.1 ± 0.1 / 20 | de en fr |
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.
News & Articles
Jowat Manual with Tips and How To Guide for cleaning problems and helpful tips for adhesive changes
Jowat Manual with Tips and How To Guide for cleaning problems and helpful tips for adhesive changes