Suche

„Service unites.“ (2017|2018)

Only by close customer contact are we in a position to optimally meet expectations and demands. Comprehensive analyses provide an optimum foundation for a successful bonding process. Tailor-made for y

https://www.jowat.com/de-CH/newsroom-detail/service-unites-20172018/

[Translate to Schweiz:] The bond between adhesive selection and finished product

substrates, today's adhesive systems can be very forgiving of surfaces which are not ideal, maintain a solid connection of subtrates in cases where the bondable

https://www.jowat.com/de-CH/newsroom-detail/translate-to-schweiz-the-bond-between-adhesive-selection-and-finished-product/

[Translate to Schweiz:] Cap, Straw, End-of-line – All that’s wanted is a good bond

The professional article is published the 12/2015 in the journal ‚Mexico Industry Magazine . You can download the article down below.

https://www.jowat.com/de-CH/newsroom-detail/translate-to-schweiz-cap-straw-end-of-line-all-thats-wanted-is-a-good-bond/

ZOW 2014: Leading adhesive technology for edgebanding

veneer or even melamine edges – many edgebands on the market are currently not suitable for processing by laser methods, or cannot be purchased in lots that

https://www.jowat.com/de-CH/newsroom-detail/zow-2014-leading-adhesive-technology-for-edgebanding/

Top, when things get really hot.

when used for hot filling processes and for products later to be shipped in not temperature controlled containers, or intended for sales in countries with tropical [...] These processing parameters are the key factors that packages remain closed not only when the content is filled in while hot. The bond also must withstand the

https://www.jowat.com/de-CH/newsroom-detail/top-when-things-get-really-hot/

Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

bonding to NFPP components. Surface pretreatment of the NFPP prior to bonding is not necessary. The decor materials may be textiles or TPO foils - with or without

https://www.jowat.com/de-CH/newsroom-detail/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

Superior performance: Jowat SE given Supplier Award 2014 by Festool GmbH

Long-term relationships between customers and suppliers are not always necessary, before the supplier can prove to be an efficient and reliable provider of [...] In less than two years, Jowat was able to convince Festool GmbH that it is not only the preferred provider of hot melt adhesives, but at the same time, also

https://www.jowat.com/de-CH/newsroom-detail/superior-performance-jowat-se-given-supplier-award-2014-by-festool-gmbh/

Successfully established on the market and now also available in granulate form: Jowatherm-Reaktant® 608.00 PUR for edgebanding.

non-stick coating on the inside of the unit is required. A special melter is not needed. Therefore, this hot melt facilitates an easy introduction to PUR technology

https://www.jowat.com/de-CH/newsroom-detail/successfully-established-on-the-market-and-now-also-available-in-granulate-form-jowatherm-reaktantr/

Successful campaign start with Ligna and Interzum.

formaldehyde. Consequently, many conversations focused on reactive PUR prepolymers. Not only was the basic absence of formaldehyde discussed, but also all the advantages

https://www.jowat.com/de-CH/newsroom-detail/successful-campaign-start-with-ligna-and-interzum/

Reinigung von Schlitzdüsen und Auftragsköpfen

n units, hoses and nozzles used for applying PO or EVA hot melt adhesives. (NOT PUR) de en fr Jowat ® 931.10 Spülmittel colourless translucent 8200 / 190 190 [...] n units, hoses and nozzles used for applying PO or EVA hot melt adhesives. (NOT PUR) de en fr Die aufgeführten Produkte stellen nur eine eingeschränkte Auswahl

/de-CH/klebstoffe/reiniger-spuelmittel/reinigung-von-schlitzduesen-und-auftragskoepfen/