Suche

Until now, the ratio between open and pressing time was around 1:3 to 1:4. As a result, the time remaining for adhesive application on large-surface laminated [...] process step crucial for the quality of the end product, was very limited. The time in the press for setting/pressing, however, was comparatively long, with the

adhesion spectrum, high initial strength, and which at the same time have a short crosslinking time. The new Jowatherm-Reaktant® 604.20 is the result of a consequent [...] n, the adhesives should offer long processing and short pressing times. The long open time of the new Jowapur® 686.70 makes this adhesive the product of choice [...] large structural components are manufactured. The relation of open time to pressing time is practically 1:1 when the processing parameters are observed, with

obsolete with PUR hot melts. The time needed to cool the adhesive down has been reduced to the level of the pressing and holding times of solvent-based adhesives [...] suitable for press lamination as well as for vacuum deep-drawing. Long dwell times and the required energy for drying and evaporation - known from classic so

ködern. Der ist auch klebrig, aber sicher süßer als unsere Produkte“, scherzt Tim Martin, der stolz auf ein Vierteljahrhundert Erfahrung in der Klebstoffindustrie [...] Ltd. unter der Leitung des Geschäftsführers Marco Kubitza. Dazu gehört neben Tim Martin unter anderem der Gebietsverkaufsleiter Clayton Jucke, der ebenfalls [...] es sich dabei für uns um das Segment mit dem schnellsten Wachstum“, erläutert Tim Martin. „Mit unseren Hotmelts Jowatherm® 250.00 und 250.85 für die Klebung von

one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open

one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open

one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open

one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open

products can therefore be successfully processed on high-speed lines with pressing times of less than 1 second. Jowat-Toptherm® 256.91 and Jowat-Toptherm® 256.92 are [...] stringing, and clearly reduces any necessary cleaning of the machinery. Down times for cleaning the soiled parts are practically eliminated. Both adhesives exhibit

match the necessary application performance, and also a very short setting time. These processing parameters are the key factors that packages remain closed [...] The bond also must withstand the entrapped heat persisting over an extended time in the core of these stacked pallets during transport and warehousing The new