Suche

well as moulding properties. On a low-pressure injection moulding line by TuTes GmbH Hotmelt- und Expansionstechnologie, Jowat AG gives a live demonstration [...] visitors may take home. Apart from the casting compounds, Jowat supplies a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores [...] roboterized manufacture of cast engine components. The Adhesives Technology theme park is located in hall 6, Jowat AG has the booth No. B 45/1 at the joint exhibition

pressing time was around 1:3 to 1:4. As a result, the time remaining for adhesive application on large-surface laminated timber, which is the process step crucial [...] new Jowapur® 686.70 is very different and introduces a new generation of adhesives that combine a high quality of the end product with substantially increased

of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin [...] impact resistance (Shore hardness) of Jowat-Toptherm® 236.30 reduces pattern transfer on the surface which might occur on laminated components when stacked. This [...] PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for example highest surface quality and

New: Jowat-Toptherm® for mattress manufacture This newcomer to the product group of Jowat-Toptherm® adhesives was developed specifically for industrial mattress [...] manufacture. It exhibits a low processing viscosity, which allows excellent wetting on flexible foam elements, wood-based substrates, cover materials, innerspring cores [...] to the normal and expected behaviour of thermoplastic hot melts, the new adhesive provides at the same time excellent wetting properties due to the low processing

from the product family of Jowat-Toptherm® permit a homogenous adhesive application without any striping effect. Depending on the quality of the surface of [...] l thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive bondlines with a degree of hardness tailored for specific [...] stress is exerted on the freshly laminated parts – e.g. stack pressure directly after manufacture. These new members of the product family of Jowat-Toptherm® are

properties are required – on water and on land – Jowat adhesives are used. Customers not only benefit from the product performance but also rely on a competent advisory [...] the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating. Adhesives of the Jowat-Toptherm® product range have [...] perfor-mances of the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced

a filter is depends largely on the absorption capacity of its filtering medium: The innovative laminating adhesives from Jowat AG ensure optimum filtering [...] substrates: This prevents any negative impact on the filtering capacity of the medium itself. The adhesives developed by Jowat for attaching the activated charcoal are [...] Exactly this formula was adopted when developing the new Jowat-Toptherm® and Jowatherm-Reaktant® adhesives. With these products, very good results are achieved

mechanical and thermal stresses. Pleating: The new Jowatherm® and Jowat-Hightherm® adhesives support the high-speed manufacturing processes of pleating by their [...] media without intermediate storage. In addition, both Jowatherm® and Jowat-Hightherm® adhesives have a wide spectrum of adhesion and allow secure bonding of substrates [...] of applications reduces setup times in production. Jowatherm® and Jowat-Hightherm® adhesives keep the filter media in shape and are responsible to a large extent

activated charcoal, the new Jowat-Toptherm® and Jowatherm Reaktant® adhesives guarantee highest performance with the lowest adhesive grammages. This ensures that [...] frame bonding The adhesives from the group of Jowat-Hightherm® are especially used for pleating due to their excellent adhesion properties on paper and fleece; [...] The efficient manufacture of filter systems requires modern adhesives that are tailored to fit the diverse manufacturing steps of lamination, pleating and frame

interiors using reactive hot melt adhesives In laminating processes for car interiors with reactive hot melt adhesives based on polyolefin (POR), the production [...] for components with complicated designs. Both the Jowat-Toptherm® adhesives and Jowatherm-Reaktant® based on polyolefin are already in serial production at well-known [...] precoating of decor materials - either pre-cut or on reels – with polyamide (PA) or polyester hot melt adhesives (PES) has been used in automotive interiors for