Suche

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

that can have a major impact on the manufacturing process and paper quality. Use of renewable raw materials In general, a hot melt adhesive is a blend of polymers [...] be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is [...] paper. In a study by the European Recovered Paper Council (ERPC) it has been determined that thermoplastic hot melt adhesive applications with a minimum horizontal

roof. With a span of 15 metres, the wood-concrete-composite ceiling is so far the biggest of its type in Germany. This year’s symposium ended with a ceremony [...] customers” concept, provided a more than worthy framework for this year’s symposium. The lectures session was started by “lignotrend”, a manufacturer of cross-laminated [...] offers workplaces for 45 Jowat employees. Based on a glued laminated timber frame, the building also has a unique design: Outside, on the surrounding walkway

powerful lamination adhesives for high-end printing foil lamination is taken over by a new product. Jowacoll ® 764.45, the new Jowat foil lamination adhesive for print [...] printing foil lamination adhesives depends on the product requirements, the type of laminator and methods of application used. Jowat application consultants

developing a technology that will sustainably replace the previous process. In addition to a new type of plastic base beam, the focus here is on a new adhesive [...] usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] e, it would be advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and

downside of this type of adhesive due to the high content of plasticiser has become evident. In general, the plasticiser for the formulation of that type of adhesive [...] also excels in a number of other characteristics: Free of plasticiser and solvents Jowacoll ® ER 147.00 is free of plasticiser and solvents. From a health perspective [...] resistance. To ensure a reliable and durable bond, the adhesive has to absorb and compensate for the tension of these materials. Adhesives with a high initial strength

common type of adhesive used for bonding construction textiles is strong PO hot melts. While the adhesive is applied over a large area when using a laminate [...] formulation, this product can be used to achieve a smooth, continuous film of adhesive even with a low application amount—a characteristic that is of high value to [...] processes. Whether processors choose a PO or a PUR adhesive, Jowat supplies suitable and reliable bonding solutions that will put a safe roof over your head in both