Suche

are used in the formulation of the adhesive? What impact does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding [...] the existing building stock for the future within the set time frame.” The adhesive manufacturer Jowat draws on extensive expertise in the manufacture of building [...] adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer pursues a holistic approach with its Green Adhesives , aimed

cost-effectiveness as a conventional fossil-based adhesive. The success of a sustainable and thus future-proof adhesive can be evaluated from various points of view [...] basis for an environmentally friendly adhesive formulation. The aim is to replace as many components of the adhesive formulation as possible – for example, [...] Increasing sustainability in adhesive bonding can only succeed by looking at different dimensions. The optimization of the adhesives themselves is particularly

trusted monomer-reduced PUR hot melt adhesive with hazard-free labeling. Jowatherm-Reaktant® MR 607.90 is one such hot melt adhesive with hazard-free labeling for [...] bondlines make this adhesive a very attractive partner for highest requirements in furniture manufacturing. The low-temp hot melt adhesive Jowatherm® 282.20 [...] products with low emissions. The two dispersion adhesives meet durability class D3 and can be used for the bonding of hard and soft wood species as well as for

it uses every day in its production process. The dispersion adhesive corresponds to stress group D3, meaning it makes the elements more resistant to short-term [...] a frame of solid wood slats. VOMO & Jowat: a strong team Having the right adhesive is indispensable for this type of production, and VOMO has always relied on [...] elements account for the largest share of the adhesives used. A dispersion adhesive is required for this area, which has the longest possible open time during

application amount does not exceed 150 g/m². The dispersion is classified a D3 adhesive in accordance with EN 204/205 and meets a tensile strength > 7.0 N/mm² according [...] on to environmental and customer protection. Jowacoll ® 103.30 is a PVAc adhesive for bonding hard 3and soft wood species as well as for the flat laminating [...] mixing the glue with crosslinking agent Jowat ® 195.40 , in which case the adhesive will meet durability class D4. Jowacoll ® 103.30 can be applied manually as

laminating of wood-based materials. The PVAc dispersion meets durability class D3 in accordance with EN 204/205. This means that Jowacoll ® 103.10 can be used [...] Jowat ® 195.40 , this will further increase the water resistance and the adhesive will meet durability class D4. This PVAc dispersion has been met with very [...] instance in the manufacturing of door leaves. Product Features Jowacoll ® 103.10 D3 dispersion with high water resistance. Multi-purpose glue for bonding hard- and

of the following glues: Jowacoll ® 103.30 (D3 glue for superior requirements), Jowacoll ® 103.70 (pH-neutral D3 glue), Jowacoll ® 104.20 (general-purpose glue [...] adhesives supplied by Jowat now also provides professional solutions for manual adhesive applications. The comprehensive package of four Jowacoll ® dispersion adhesives

the use and requirements for the floor, the portfolio provides adhesives from D3 dispersions according to EN 204/205 for interior applications with short-term [...] as thermoplastic foils and which meet the requirements for durability class D3. Two-component EPI (emulsion polymer isocyanate) adhesives have been tried and [...] series meet the entire range of requirements for lacquer glues. This makes adhesive handling significantly more convenient, especially for smaller woodworking

provide visitors with specific, specialised information on the different adhesive applications. The conclusion has been extremely positive. Visitors were very [...] product series presented by Jowat at the trade fair was an unfilled edgebanding adhesive for superior applications, which facilitates colourless and virtually invisible [...] focus on the significant process and efficiency benefits compared to liquid adhesive systems in the manufacture of mattresses and upholstered furniture. The new

3,0 ± 0,5 / 20 D3 / D4 de en fr Jowacoll ® 104.20 PVAc Dispersion 10500 ± 2000 / 20 9 ± 2 / RT 4,5 ± 0,5 / 20 D2 de en fr hot melt adhesive Base Viscosity [mPas] [...] melts with special adhesives for the manufacture of lightweight boards. Which adhesive is the product of choice depends on the materials assembled ( like for instance [...] skin, high-pressure laminates with PU cores, etc), and also on the method of adhesive application (usually roller coater or slot die), and last but not least on