Suche

tant: New reactive hot melt developments for the manufacture of cleaning textiles, PVC tablecloths and sanding papers: Reactive hot melt adhesives are the top [...] polyolefin (PO) or polyurethane (PUR), whether thermoplastic or reactive: The new hot melt adhesives from Jowat AG have been developed especially for the production [...] top performers among the hot melts. They are used when manufacturing conditions or the processing environments for technical textiles are very challenging.

high-performance PO hot melts from the Jowat Toptherm® series. Tailored specifically for their individual applications, these hot melt adhesives deliver perfect [...] thanks to their mineral oil barriers, efficiency and sustainability. These PO hot melts are approved as food packaging according to food laws and qualified for use [...] high yield and clean processing, minimised maintenance and downtimes, the hot melt adhesives can make an important contribution to efficient processes. Service

The all-round new PUR hot melt is suitable for all 3D laminating applications in the automotive industry and provides superior quality, which previously required [...] characterised by significantly optimised product and processing properties. The hot melt adhesive provides a considerably faster build-up of cohesion and an improved [...] applied with different systems, with superior results in every case. The new hot melt adhesive is suitable for press lamination as well as for vacuum deep-drawing

colourless, transparent, and crosslinking hot melt of the product group of Jowatherm-Reaktant® is used. This hot melt also offers a wide adhesion spectrum, m [...] the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced flammability, degree [...] es for furniture surfaces create new challenges for the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating

is a polyolefin hot melt on metallocene technology basis and – like many Jowat-Toptherm® products – it is suitable for processing on melt units of the latest [...] units containing hot filled products must meet superior requirements: extremely good resistance to oxidation and colour stability in the melt, a wide thermal [...] is the high heat resistance, a characteristic most effective when used for hot filling processes and for products later to be shipped in not temperature controlled

SE Photo 3: Hot melt adhesive cartridges from Jowat for the Festool edgebander CONTURO KA 65 Source: Festool GmbH Photo 4: Insertion of a hot melt adhesive cartridge [...] able to convince Festool GmbH that it is not only the preferred provider of hot melt adhesives, but at the same time, also a very flexible and service-oriented [...] furniture parts in small serial production. The unique feature is the special hot melt adhesive application system. It provides an efficient, simple and clean operation

for vehicle interiors using reactive hot melt adhesives In laminating processes for car interiors with reactive hot melt adhesives based on polyolefin (POR) [...] materials - either pre-cut or on reels – with polyamide (PA) or polyester hot melt adhesives (PES) has been used in automotive interiors for quite some time [...] by using press lamination, to the respective base materials. The precoated hot melt adhesive is in these cases reactivated by heat and forms a very strong bond

coating on the inside of the unit is required. A special melter is not needed. Therefore, this hot melt facilitates an easy introduction to PUR technology, especially [...] the year. Now, Jowat has introduced a granulate version of the unfilled PUR hot melt, which can be processed on all standard edgebanding units. The translucent

adhesive systems. This applies especially for the new Jowatherm-Reaktant ® PUR hot melts: Their processing characteristics were tailored for the high quality demands [...] in flat lamination. This provides advantages to the reactive Polyurethane hot melts of this group: a wide spectrum of adhesion on the most diverse substrates [...] reliability. The new Jowatherm-Reaktant ® flat bonding adhesives are powerful PUR hot melts with convincing additional aspects like high heat resistance and good processing

2015 Key topic at the main Jowat booth: Reactive PUR hot melts for edgebanding. Reactive PUR hot melts, the high performers among adhesives, were the main subject [...] at the Ligna 2015 was in hall 26. Conversations here focused mainly on PUR hot melts for edgebanding. These adhesives with increased initial strength facilitate [...] Thermoplastic adhesives replace water-based systems. Thermoplastic, PO-based hot melts were the centre of attention at the Interzum. Water-based adhesive systems