Suche

It is worth changing to a new adhesive if you are seeking to improve technical, economic, or ecological conditions. Yet you should not introduce new adhesives [...] adhesives without sufficient planning. Different types of adhesives used together can interfere with each other, causing unwanted chemical reactions. To prevent any

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

unterscheidet man drei Arten von Mikroplastik: Primäres Mikro-plastik Typ A, primäres Mikroplastik Typ B und sekundäres Mikroplastik. Letzteres entsteht durch Verwitterung [...] ik Typ B entsteht bei der Nutzung (beispielsweise Abrieb von Reifen oder beim Waschen freigesetzte synthetische Fasern). Als primäres Mikroplastik Typ A gelten [...] Kunststof-fe kleiner als fünf Millimeter. Die Freisetzung von Mikroplastik Typ A kann inten-diert, bewusst in Kauf genommen oder durch einen Unfall verursacht

provide a high value contribution. Pleating and frame bonding Jowatherm ® and Jowat-Highterm ® adhesives for pleating and frame assembly provide a high initial [...] impress through superior adhesion to different types of filter materials, like papers and non-wovens, and a high heat resistance which is necessary for downline [...] requirements with regard to air filtration in vehicles and buildings, as well as a wide range of filter materials and manufacturing methods. And the demands are

furniture fronts are more than a trend in modern furniture design. The degree of gloss of the components is additionally enhanced when a colourless, transparent, [...] create new challenges for the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating. Adhesives of the Jowat-Toptherm® [...] are stacked, are clearly reduced with these new hot melt types. Modern vehicle seats represent a combination of ergonomics and comfort. For upholstery and

powerful lamination adhesives for high-end printing foil lamination is taken over by a new product. Jowacoll ® 764.45, the new Jowat foil lamination adhesive for print [...] printing foil lamination adhesives depends on the product requirements, the type of laminator and methods of application used. Jowat application consultants

Teilnehmende im bis auf den letzten Platz gefüllten Audimax waren dabei, als u.a. Ansgar van Halteren vom Industrieverband Klebstoffe e. V. über die „Faszination [...] gesamten Jowat-Welt angesehen. Der im Haus der Technik ausgestellte Oldtimer vom Typ Lloyd LP 600 Kombi, im Stil der ersten Jowat-Firmenfahrzeuge aus den späten