Suche

It is worth changing to a new adhesive if you are seeking to improve technical, economic, or ecological conditions. Yet you should not introduce new adhesives [...] adhesives without sufficient planning. Different types of adhesives used together can interfere with each other, causing unwanted chemical reactions. To prevent any

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is [...] Primary microplastics type B are formed during use (e.g. tire abrasion or fibres released during the washing of synthetic clothing). Type A microplastics are e [...] millimetres in length. The release of type A microplastics can be intended, deliberately produced, or caused by accident. A major focus of the EU’s plastics strategy

of matte glass and elegant veneer is a real eye-catcher in any house. To reliably bond a veneer, it is necessary to have a high-quality adhesive. For this and [...] material. PORTA had never used a PUR hot melt adhesive before, however, and did not yet have a suitable melting system for this type of adhesive. But as Dr. Zdzisław [...] than a quarter century of cooperation. Long tradition of cooperation Today, nobody remembers exactly how the first contact was established. “It was a few years

series are characterized by a high composite adhesion also with demanding further processing and can be processed on standard machine types with significantly improved [...] food contact is no longer necessary. The minimised cleaning efforts can lead to a considerable time and consequently cost advantage. In case you should change [...] regard to food contact. In combination with the quality level this represents a unique position in the market.

roof. With a span of 15 metres, the wood-concrete-composite ceiling is so far the biggest of its type in Germany. This year’s symposium ended with a ceremony [...] customers” concept, provided a more than worthy framework for this year’s symposium. The lectures session was started by “lignotrend”, a manufacturer of cross-laminated [...] offers workplaces for 45 Jowat employees. Based on a glued laminated timber frame, the building also has a unique design: Outside, on the surrounding walkway

provide a high value contribution. Pleating and frame bonding Jowatherm ® and Jowat-Highterm ® adhesives for pleating and frame assembly provide a high initial [...] impress through superior adhesion to different types of filter materials, like papers and non-wovens, and a high heat resistance which is necessary for downline [...] requirements with regard to air filtration in vehicles and buildings, as well as a wide range of filter materials and manufacturing methods. And the demands are